Kenwood KDC-X895 Instruction Manual - Page 33
Initial setting, Select Standby - firmware update
UPC - 019048193186
View all Kenwood KDC-X895 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Initial setting Configures initial settings of this unit. 1 Select Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Initial setting mode Turn the Control knob to select "Initial Settings", and then press the Control knob. 4 Select the desired Initial setting item Turn the Control knob to select Initial setting item, and then press the Control knob. Display Overview "Initial Settings" "Source Select" Select"2"to change the source selection method. Press the [SRC] button, turn the Control knob to select the source, and then press the Control knob to determine it. 1 / 2 "Key Beep" Setting the operation check sound (beep sound) ON/OFF. "ON" / "OFF" "Function Language" Changes the display language of items in Function setting. "English" / "Français" / "Español" "Built-in AUX" Sets whether to display AUX during source selection. "ON" / "OFF" "CD Read" Sets the method for reading CD. When unable to play special format CD, set this function to"2"to force playing. Note that some music CDs may be unplayable even when set to "2". In addition, audio files cannot be played when set to "2". Normally, keep this set to "1". 1: Automatically distinguishes between audio file disc and music CD when playing disc. 2: Forces playing as music CD. "Built-in AMP" Selecting"OFF"turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. "ON" / "OFF" "Speaker Select" Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; "OFF": OFF "5/4inch": For 5 & 4 in. speaker "6x9/6inch": For 6 & 6x9 in. speaker "O.E.M.": For the OEM speaker "F/W Update #.##" Upgrades the firmware. Selecting"YES"and then pressing Control knob starts upgrading the firmware. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ ( : Factory setting) 5 Set the Initial setting item Turn the Control knob to select desired value, and then press the Control knob. The previous item is displayed. 6 Exit Function setting mode Press the [ ] button for at least 1 second. English | 33