Kenwood KDCX789 Instruction Manual - Page 21

5 Select the graphic/ spectrum analyzer display Press the [3] ("Graph") button. 6 Select the graphic/ spectrum analyzer display part display Push the Control knob to [4] or [¢]. Each time the button is pressed, the graphic display/ spectrum analyzer display switches as shown below. Graphic display/ Spectrum Analyzer display Movie 1 Movie 2 Movie 3 (KDC-X889/MP828 only) *Downloaded movie Spectrum analyzer 1 Spectrum analyzer 2 Spectrum analyzer 3 Spectrum analyzer 4 (KDC-X889/MP828 only) Spectrum analyzer 5 (KDC-X889/MP828 only) Wallpaper & *Downloaded Wallpaper • * Function of the KDC-X889/MP828/X789 • * Downloaded movie and Downloaded Wall Paper, refer to (page 48). • KDC-X789 doesn't display the Spectrum analyzer. 7 Exit display control mode Press the [6] ("RTN") button. • The setting of this function is available while "Display Type A"/ "Display Type B" is selected for the Display mode. Display Type A/ Display Type B Wallpaper selecting Select a wallpaper to display when Display Type is set to "Display Type A"/ "Display Type B". 1 Select the wallpaper display Refer to (page 20). 2 Select the wallpaper Display the wallpapers one after another and select one 1 Turn the wallpaper scan ON. Press the Control knob. Each time the knob is pressed, the Wallpaper scan is turned ON and OFF. When it's ON, "SCAN" is displayed. When it's ON, each wallpaper is displayed every several seconds. 2 At the wallpaper you want to display. Press the Control knob. Select wallpaper manually 1 Turn the wallpaper scan OFF. Press the Control knob. Each time the knob is pressed, the Wallpaper scan is turned ON and OFF. 2 Select the wallpaper. Push the Control knob to [FM] or [AM]. Each time the knob is pushed, the Wallpaper changes. 3 Exit Display Control mode Press the [6] ("RTN") button. English | 21