Kenwood KDV-U4349 User Manual - Page 11

Item "ZONE2" "AUTO1"/ "AUTO2"/ "MANUAL" "CRSC" "NAME SET" "P/N" "M/V" "ABOOK" "SKIP" "iART" "FILETYPE" > "DISC" > "USB" "SCL" "AUX" "DEMO" "DIVX" Setting Entry Setting overview Condition Page "F"/ "R"* 4/ ¢ Specifies the destination of sub source sound when the Dual 32 Zone function is turned on. "AUTO1"*/"AUTO2"/ 4/ ¢ Selects the tuning mode of the radio. 31 "MANUAL" "OFF"/ "ON"* 4/ ¢ Switches to Monaural to decrease noise when reception is poor. - 1 sec. Sets the display when switched to AUX source. 14 "PAL"/ "NTSC" 4/ ¢ Sets the color system for the monitor. You have to turn the power - - off after the setting is changed. Displays the firmware version of Microvision. - "SL"/ "NM"/ "FA" 4/ ¢ Sets the audio book playback speed. - "0.5%"*/ "1%"/ 4/ ¢ Sets the ratio of skip performed with . "OFF"/ "ON"* 4/ ¢ Specifies whether or not the artworks of the music files are - displayed. "A/V"/ "PIC" 4/ ¢ Selects playback file type when a disc or USB contains different 13 types of files. You can make advanced settings in the "FILE TYPE" of the Setup menu. "A" or "V" may appear on the display after setting. "AUTO"*/ "MANU" 4/ ¢ Specifies whether the text is scrolled automatically. -- "OFF"/ "ON1"*/ 4/ ¢ Sets whether to display AUX during source selection. 31 "ON2" "OFF"*/ "ON" 2 sec. Specifies whether to enable demonstration. -7 Display the format version of DivX. - "iPodCTRL" Item "iPodCTRL" Setting "HANDS ON"/ "MODE OFF"* Entry Setting overview When set to "HANDS ON", allows you to operate iPod with the AUD control on the iPod. Condition Page 22 "DSP" Item "CONTROL" "EQ" Setting "B.BOOST" "HIGHWAY" "POSITION" "OFF"*/ "STEP1"/ "2" "OFF"/ "STEP1"/ "2"/ "3"*/ "4" "SETUP" "CABIN" "SPEAKER" "DTA" "X'OVER" "PRESET" "RECALL" "MEMORY" "DSP SET" "BYPASS"/ "THROUGH"* Entry Setting overview [AUD] Sets the sound quality. Sets the Bass Boost level in two steps. AUD Condition Page 25 - Compensates the low volume or bass sound being lost by road AUD noises to make vocal sound clearer. 32 [AUD] Compensates the sound environment in accordance with the 26 listening position. [AUD] Selects the car type to compensate the distance difference 27 between each speaker. [AUD] Sets the connected speaker, speaker size, and installation 27 position. [AUD] Makes fine adjustment of the compensation value specified at 28 Cabin. [AUD] Makes fine adjustment of the X'Over value specified at Speaker. 28 [AUD] Registering the value setup by Sound Control. Recalling the 29 sound setup registered by . [AUD] Registering the value setup by Sound Control. 29 Setting "BYPASS" passes the DSP function. - AUD Setting "THROUGH" activates the DSP function. English | 11