Kenwood KIV-BT900 Quick Start Guide - Page 15
Installation the Microphone Unit
UPC - 019048189790
View all Kenwood KIV-BT900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
KIV-BT900 only Installation the Microphone Unit 1. Check the installation position of the microphone (accessory 7). 2. Remove oil and other dirt from the installation surface. 3. Install the microphone. 4. Wire the cable up to the unit with it secured at several positions using tape or the like. ⁄ • Install the microphone as far as possible from the cell-phone. Accessory7 Fix a cable with a commercial item of tape. Peel the release coated paper of doubleface adhesive tape to fix on the place shown above. Adjust the direction of the microphone to the driver. English | 15
English
|
15
Installation the Microphone Unit
1. Check the installation position of the
microphone (accessory
7
).
2. Remove oil and other dirt from the
installation surface.
3. Install the microphone.
4. Wire the cable up to the unit with it
secured at several positions using tape or
the like.
/
• Install the microphone as far as possible
from the cell-phone.
KIV-BT900 only
Peel the release coated paper of double-
face adhesive tape to fix on the place
shown above.
Adjust the direction of the microphone to
the driver.
Fix a cable with a commercial item of tape.
Accessory
7