Kenwood KMB-35A Operation Manual - Page 1

MULTI CHARGER ADAPTER KMB-35A INSTRUCTION MANUAL Thank you for purchasing this KMB-35A Multi Charger Adapter. APPLICABLE CHRGER POCKET KSC-35S/ KSC-35SCR x 6 SUPPLIED ITEMS Multi charger adapter W0H-0072-XX.......... 1 Locking bar J1K-0666-XX 1 Screw set N9X-0047-XX........... 1 AC cord 1 • E type E3A-0497-XX • T type E3A-0498-XX Instruction manual 1 SAFETY PRECAUTIONS This manual contains important safety and operating instructions for the KMB-35A multi charger adapter. • Before using this multi charger adapter, read all instructions and cautionary markings on the power source, battery charger, battery, and the product using the battery. • The ambient temperature should be from 5°C to 35°C while charging is in progress. • To reduce the risk of injury or equipment damage, use only with the specified rechargeable battery pack models in their KENWOOD chargers. Other types of batteries may burst, causing personal injury and damage. • Do not recharge a battery if it is already fully charged. Doing so will overcharge the battery and may shorten its life or damaged it. • Do not expose the multi charger adapter to rain, snow, or moisture. • To reduce the risk of damage to the AC cord, grasp and pull the plug rather than the cord when disconnecting. • Make sure the AC cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or cause personal injury. • Do not operate the multi charger adapter if it has received a potentially damaging sharp blow, has been dropped, or has otherwise been damaged in any way; take it to a qualified service repair person. • Do not disassemble the multi charger adapter, or any KENWOOD adapters or accessories. Take it to a qualified service repair person when service or repair is required. Incorrect reassembly may result in the risk of electric shock or fire. • To reduce the risk of electric shock, unplug the multi charger adapter from the AC outlet before attempting any maintenance or cleaning. Turning off controls will not reduce the risk of shock or fire; the AC cord must be removed from the AC outlet. • When the KMB-35A will not be used for a long time, unplug the AC cord from the AC outlet. INSTALLATION 1 Connect the DC plug of the KMB-35A multi charger adapter to the DC IN jack on the rear of the KSC-35S/ KSC-35SCR charger pocket. 2 Using the supplied screws/ flat washers, secure the charger pockets to the case with the locking bar. Locking bar 3 Connect the AC cord to the AC socket on the side of the multi charger case. 4 Plug the AC cord into an AC outlet. CHARGING PROCEDURE Refer to the KSC-35S/ KSC-35SCR instruction manual for charging procedures. SPECIFICATIONS Input voltage 100 - 240 VAC Output voltage 12 VDC Dimensions (W x H x D 270.4 x 82.1 x 243.4 mm Weight approx. 2.2 kg Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. © 2017 B5A-2337-00 (E, T)