Kenwood KMM-BT306 Instruction Manual 1 - Page 27
Installing the unit in-dash mounting, Removing the unit, Installing the unit without mounting sleeve
View all Kenwood KMM-BT306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation/Connection Installing the unit (in-dash mounting) Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). Do the required wiring. (Page 28) Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car Bend the appropriate tabs to hold the sleeve firmly in place. Use only the specified screws. Using wrong screws might damage the unit. Removing the unit 1 Detach the faceplate. 2 Remove the trim plate. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. ENGLISH 27