Kenwood KMM-BT325U Instruction Manual - Page 42
The Bluetooth connection, between the Bluetooth, device and the unit is, unstable., Delete
View all Kenwood KMM-BT325U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
TROUBLESHOOTING Symptom Remedy "CH UNAVAIL" The selected channel is unavailable. For more information about the SiriusXM channel lineup, visit . "CHECK ANTENNA" Check that the antenna and its connection are in good condition. SiriusXM® Radio "CHECK TUNER" Make sure the SiriusXM Vehicle Tuner is connected to the unit. "NO SIGNAL" Make sure the antenna is mounted outside the vehicle. "SUBSCRIPTION UPDATED - PRESS ENTER TO CONTINUE." Your subscription is updated. Press the volume knob to continue. "CODE ERROR" Make sure you have entered the correct pass code. (Page 18) "NO CONTENT" There is insufficient content to start TuneScan. "SCAN CANCEL" TuneScan has been aborted. No Bluetooth device is • Search from the Bluetooth device again. detected. • Reset the unit. (Page 3) Pairing cannot be made. • Make sure you have entered the same PIN code to both the unit and Bluetooth device. • Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. (Page 19) Bluetooth® Echo or noise is heard during a phone conversation. • Adjust the microphone unit's position. (Page 19) • Check the [ECHO CANCEL] setting. (Page 21) Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth device. • Move the car to a place where you can get a better signal reception. 38 ENGLISH Symptom Remedy Voice calling method is not successful. • Use voice calling method in a more quiet environment. • Reduce the distance from the microphone when you speak the name. • Make sure the same voice as the registered voice tag is used. Sound is being interrupted or skipped during playback of a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit and try to connect again. • Other Bluetooth devices might be trying to connect to the unit. The connected Bluetooth audio player cannot be controlled. • Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.) • Disconnect and connect the Bluetooth player again. Bluetooth® "NOT SUPPORT" The connected phone does not support Voice Recognition feature or phonebook transfer. "NO ENTRY"/"NO PAIR" There is no registered device connected/found via Bluetooth. "ERROR" Try the operation again. If "ERROR" appears again, check if the device supports the function you have tried. "NO INFO"/"NO DATA" Bluetooth device cannot get the contact information. "HF ERROR XX"/ "BT ERROR" Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center. "SWITCHING NG" The connected phones might not support phone switching feature. The Bluetooth connection between the Bluetooth device and the unit is unstable. Delete the unused registered Bluetooth device from the unit. (Page 23)