Kenwood KMM-BT325U Quick Start Guide - Page 13

BLUETOOTH® Depending on the operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. Connect the microphone Connect the supplied microphone to the microphone input terminal/jack on the rear panel. Adjust the microphone angle Secure using cord clamps (not supplied) if necessary. Pair and connect a Bluetooth device for the first time 1 Press B SRC to turn on the unit. 2 Search and select the name of your receiver ("KMM-BT5 "/ "KMM-X5 "/"KMM-BT3 "/"KMM-BT2 "/"KMR-M3 ") on the Bluetooth device. "PAIRING" "PASS XXXXXX" "Device name" "PRESS" "VOLUME KNOB" appears on the display. • For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. 3 Press the volume knob to start pairing. "PAIRING OK" appears when pairing is completed. Once pairing is completed, Bluetooth connection is established automatically. • / / / / : "BT1" and/or "BT2" indicator on the faceplate lights up. • / : "BT1" and/or "BT2" on the display window lights up. Answer a call Press or the volume knob or one of the number buttons (1 to 6). • To adjust the phone volume [00] to [35], turn the volume knob. • To end a call, press . Audio player via Bluetooth 1 Press B SRC repeatedly to select BT AUDIO. • Pressing enters BT AUDIO directly. 2 Operate the audio player via Bluetooth to start playback. To Play back/pause Select group or folder Reverse skip/Forward skip Reverse/Fast-forward Repeat play Random play On the faceplate Press 6 IW. Press 2 / 1 . Press . Press and hold . Press 4 repeatedly. Press and hold 3 to select [ALL RANDOM]. 9