Kenwood KMR-M328BT Instruction Manual - Page 15
Display received emergency alert messages, Other settings
![]() |
View all Kenwood KMR-M328BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HD Radio™ Tuner (for / ) Display received emergency alert messages The received emergency alert messages are stored in the Alert Message List, and you can check them later. While listening to the HD RADIO source... 1 Press to display the Alert Message List. 2 Turn the volume knob to select a message. 3 Press the volume knob to display the information related to the message. 4 Press again to exit. • "NO LIST" appears when the list is empty. • This feature can store up to four messages in the list. • To clear the message list, set [FACTORY RESET] to [YES]. (Page 7) Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . Default: [XX] [TUNER SETTING] [SEEK MODE] Selects the searching method for S / T buttons when pressed. [AUTO1]: Automatically search for a station or channel. ; [AUTO2]: Search for a preset station or channel. ; [MANUAL]: Manually search for a station or channel. [IF BAND] [AUTO]: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; [WIDE]: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain. [AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ; [NO]: Cancels. • Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6) [RECEIVE MODE] Sets the receive mode of the HD Radio receiver. [AUTO]: Automatically tunes to analog broadcast when there is no digital broadcast. ; [DIGITAL]: Tunes in to digital broadcast only. ; [ANALOG]: Tunes in to analog broadcast only. [CLOCK] [TIME SYNC] [ON]: Synchronizes the unit's time to the Radio Broadcast Data System station time. ; [OFF]: Cancels. ENGLISH 9
![](/manual_guide/products/kenwood-kmmbt228u-instruction-manual-2cbf0a3/15.png)