Kenwood KRC-218 User Manual - Page 6
Volume, Attenuator, Loudness, Audio Control Setting, Turning Attenuator On/Off
View all Kenwood KRC-218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English General features Volume Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. NOTE Turning the volume up, or turning it all the way down deactivates the attenuator function. 1 Press the AUD button for at least one second to enter the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. NOTE Source tone memory Each source ( tape, CD, FM, AM and disc changer ) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are recalled automatically whenever you use that source ( for example, FM mode uses the tone settings made for FM, AM for AM, etc.). 3 Adjust each mode Press the 4/¢ button. Please refer to the following for the adjusting values. 4 Press the AUD button to end the control mode. Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up when the loudness function is on. Turning Loudness On/Off: Press the LOUD button for at least one second to switch the loudness on and off. "BAS" : Adjust the bass level. Setting values: - 4 - + 4 "TRE" : Adjust the treble level. Setting values: - 4 - + 4 Audio Control Setting Adjust various parameters of sound quality. "BAL" : Adjust the balance level. Setting values: Left 15 - Right 15 -6-