Kenwood KVT-729DVD User Manual - Page 90

Remote Controller This unit can be operated using the Remote Controller supplied with the unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not place the battery near an open flame or heat source. This may cause the battery to explode. • Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician. • Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician. Battery installation Use two "AAA"/"R03"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and - poles aligned properly, following the illustration inside the case. Remote Controller mode switch The functions operated from the remote controller differ depending on the position of the mode switch. AUD mode Switch to this mode when controlling a selected source or a CD changer etc. O O NTER O O AUD• DVD• T V• DVD mode Switch to this mode when playing DVDs or CDs etc. with the player integrated in this unit. ⁄ • If the Remote Controller operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such instances, replace the both batteries with new ones. TV mode This is switched when controlling TV. ⁄ • The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)". • When controlling a player that is not integrated in the unit, select "AUD" mode. 90 KVT-729DVD