Kenwood MP538U Instruction Manual - Page 13
Other Functions - security code
UPC - 019048178046
View all Kenwood MP538U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Other Functions Activating Security Code ⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Select Security Code item during Menu mode (In Standby mode) "Security Set" is displayed. For how to select Function Control items, refer to (page 6). 2 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "SECURITY SET" is also displayed. 3 Enter Security Code Operation type Select the digits to enter Select the Security Code numbers Operation Push the Control knob towards right or left. Turn the Control knob or push it towards up or down. 4 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "SECURITY SET" is also displayed. 5 Do the step 3 through 4 operation, and reenter the Security Code. "Approved" is displayed. The Security Code function activates. ⁄ • If you enter the wrong Code in steps 3 through 4, repeat from step 3. 6 Exit Security Code mode Press the [FNC] button. Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed. 1 Turn the power ON. 2 Do the step 3 through 4 operation, and enter the Security Code. "Approved" is displayed. Now, you can use the unit. Deactivating Security Code To deactivate the Security Code function. 1 Select Security Code item during Menu mode (In Standby mode) Select the "Security Clear" display. For how to select Function Control items, refer to (page 6). 2 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "SECURITY CLEAR" is also displayed. 3 Enter Security Code Operation type Select the digits to enter Select the Security Code numbers Operation Push the Control knob towards right or left. Turn the Control knob or push it towards up or down. 4 Press the Control knob for at least 3 seconds. "Clear" is displayed. The Security Code function deactivates. 5 Exit Security Code mode Press the [FNC] button. ⁄ • If a wrong security code is entered, "Error" is displayed. Enter a correct security code. English | 13