Kenwood MP642U Instruction Manual - Page 28
Audio Adjustments
UPC - 019048183279
View all Kenwood MP642U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Audio Adjustments Audio Control You can adjust following Audio Control items; Adjustment Item Display Range Rear volume "REAR VOLUME" 0 - 35 Subwoofer level "SUBWOOFER LEVEL" -15 - +15 Balance "BALANCE" Left 15 - Right 15 Fader "FADER" Rear 15 - Front 15 Exit Audio Control mode (Volume control mode) 1 Enter Audio Control mode Press the [AUD] knob. 2 Select the Audio item to adjust Press the [AUD] knob. 3 Adjust the Audio item Turn the [AUD] knob. 4 Exit Audio Control mode Press any button. Press a button other than the [AUD] knob or [0] button. Audio Setup You can set Sound system , such as follows; Adjustment Item Display Range Volume offset "VOL-OFFSET" -8 - ±0 (AUX: -8- +8) Dual Zone System "2 ZONE" OFF/ON ⁄ • Volume offset: Sets each source's volume as a difference from the basic volume. • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - Set up the channel of sub source by "ZONE2" of (page 6). - Select Main source by [SRC] button. - Adjust the volume of Front channel by [AUD] knob. - Adjust the volume of Rear channel by (page 28) or [5]/[∞] button on the remote control (page 43). - The Audio Control has no effect on sub source. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [AUD] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [AUD] knob. 4 Adjust the Audio setup item Turn the [AUD] knob. 5 Exit Audio Setup mode Press the [AUD] knob for at least 1 second. 28 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U