Kenwood NX-3200 User Manual

Kenwood NX-3200 Manual

Get Kenwood NX-3200 PDF manuals and user guides View all Kenwood NX-3200 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood NX-3200 manual content summary:

  • Kenwood NX-3200 | User Manual - Page 1
    .. . NX-3000 series USER MANUAL B5A-2074-00/04
  • Kenwood NX-3200 | User Manual - Page 2
    FUNCTION 47 5-TONE SIGNALING (For E type only 50 VOICE OPERATED TRANSMISSION (VOX 52 BACKGROUND OPERATIONS 53 Bluetooth ...56 BUILT-IN MEMORY ...66 INDICATOR LIST ...68 This manual has been prepared based on basic settings. Depending on the setting, the descriptions provided may be different
  • Kenwood NX-3200 | User Manual - Page 3
    ] to enter Transceiver Password Mode using the Menu Mode. ● If a password has been registered and the [Transceiver Password] function has not been programmed to a button or configured to the menu, the transceiver enters Transceiver Password Mode when the power is turned on. 2 Enter a number using
  • Kenwood NX-3200 | User Manual - Page 4
    volume. Rotate clockwise to increase the volume and counterclockwise to decrease the volume. Mobile Press the button programmed as [Volume Up] to increase the volume. Press the button programmed as [Volume Down] to decrease the volume. SELECTING A ZONE AND CHANNEL 1 Select the desired zone using the
  • Kenwood NX-3200 | User Manual - Page 5
    a call to those parties on a Conventional channel. 1 Press the button programmed as [Group], [Group + Short Message] or [Group + Status] to enter Group Call Mode. Alternatively, press the button programmed as [Menu] to enter Group Call Mode using the Menu Mode. ● The
  • Kenwood NX-3200 | User Manual - Page 6
    + Status] to enter Individual Call Mode. Alternatively, press the button programmed as [Menu] to enter Individual Call Mode using the Menu Mode. directly by pressing the keypad. ● Press the [ ] button to enter the manual input mode. To delete the ID entered, press the [ ] button to delete
  • Kenwood NX-3200 | User Manual - Page 7
    a proceed tone sounds. 1 Select the configured Group channel using the buttons programmed as [Channel Up]/ [Channel Down]. 2 Press and hold the PTT switch directly by pressing the keypad. ● Press the [ ] button to enter the manual input mode. To delete the ID entered, press the [ ] button to delete
  • Kenwood NX-3200 | User Manual - Page 8
    , you can switch it on or off as desired.) 2 When you hear the caller's voice, readjust the volume as necessary. ● If signaling has been programmed on the selected channel, you will hear a call only if the signal tone matches the tone set up on your transceiver. Note: ● Signaling allows your
  • Kenwood NX-3200 | User Manual - Page 9
    functions can still be accessed using the transceiver Menu. Refer to "FUNCTION LIST" {p. 10} for the available Menu items. o MENU ACCESS 1 Press the button programmed as [Menu]. ● The category list is shown. ● When there is only one category, the function list is shown (proceed to step 4). 2 Press
  • Kenwood NX-3200 | User Manual - Page 10
    onto the transceiver buttons. Refer to "FUNCTION LIST" for the available programmable functions. FUNCTION LIST PF Button: Functions that can be programmed to the transceiver buttons Menu: Functions that can be accessed using the transceiver Menu Analog Conv.: Channels set up for Analog Conventional
  • Kenwood NX-3200 | User Manual - Page 11
    ppppp Bluetooth Bluetooth ppppp Bluetooth Connect/ Disconnect - p N/A p p p Bluetooth Device BT Device N/A p p p p Bluetooth Discoverable Discoverable N/A p p p p Bluetooth Headset Connection Type BT Headset Typ N/A p p p p Bluetooth Information Bluetooth Info N/A p p p p Bluetooth
  • Kenwood NX-3200 | User Manual - Page 12
    *4 External Mic Sense External Speaker Fixed Volume Front Panel Programming Function GPS GPS/ Bluetooth Reset GPS Position Display Group *6 Group + Short Message LCD Brightness *2 Lone Worker Low Transmit Power Maintenance Manual Site Hunt Medium Transmit Power Menu Mic Sense Microphone Type
  • Kenwood NX-3200 | User Manual - Page 13
    p p p Save Log Data Save Log Data p p p p p Scan Scan ppppp Scan Delete/ Add Scan Del/Add ppppp Scan Normal Scan Normal ppppp Scan Program Scan Program ppppp Scrambler/ Encryption Scram/Encryp ppppp Scrambler/ Encryption Code Scram/Enc Code ppppp Send the GPS Data Send GPS Data
  • Kenwood NX-3200 | User Manual - Page 14
    PF Button Menu Analog Conv. NXDN Conv. DMR Conv. Function Menu Display Speaker Attenuation Speaker Type Squelch Level Squelch Off Squelch Off Momentary Stack Status Surveillance System Down System Lock System Search Speaker Type Squelch Level Squelch Off Stack Status Surveillance System Lock
  • Kenwood NX-3200 | User Manual - Page 15
    tone p N/A p p p p p N/A p N/A Activity Detection *1 Activity Det ppppp Activity Reset *1 - p N/A p p p ANR Preset Audio Profile Auto Telephone Autodial Autodial Programming ANR Preset N/A p Audio Profile N/A p Auto Telephone p p Auto Dial pp Auto Dial Prog pp ppp ppp p N/A N/A ppp
  • Kenwood NX-3200 | User Manual - Page 16
    ~ 5 Direct Channel 1 ~ 5 Select Display Format Display Type *1 Emergency *4 External Mic Sense External Speaker Fixed Volume Front Panel Programming Function GPS GPS/ Bluetooth Reset GPS Position Display Group *6 Group + Short Message *6 Group + Status *6 Group ID/ Channel Entry High Transmit Power
  • Kenwood NX-3200 | User Manual - Page 17
    p p p p p Lone Worker Lone Worker ppppp Low Transmit Power Low TX Power ppppp Maintenance Maintenance ppppp Manual Site Hunt Manual Hunt p p N/A N/A N/A Medium Transmit Power Med TX Power N/A p p p p Menu - p N/A p p p Mic Sense Mic Sense N/A p p p p Microphone Type Monitor
  • Kenwood NX-3200 | User Manual - Page 18
    Save Log Data Save Log Data p p p p p Scan Scan ppppp Scan Delete/ Add Scan Del/Add ppppp Scan Normal Scan Normal ppppp Scan Program Scan Program p p p p N/A Scrambler/ Encryption Scram/Encryp ppppp Scrambler/ Encryption Code Scram/Enc Code ppppp Send the GPS Data Send GPS Data
  • Kenwood NX-3200 | User Manual - Page 19
    Auxiliary ( ) button on Mobile transceivers and the optional speaker/ microphone PF 1 (orange) button. *5 Site Select and System Select can be programmed only on the Selector knob on Portable transceivers. *6 Group, Group + Short Message, Group + Status, Individual, Individual + Short Message and
  • Kenwood NX-3200 | User Manual - Page 20
    CHARACTER ENTRY While in the character entry screen, you can use the following two methods to enter the characters: o Pressing the [J]/[K] buttons Press [J]/[K] to cycle the characters from A ~ Z, a ~ z, 0 ~ 9, and a space (default settings). You can also assign a character to an optional button
  • Kenwood NX-3200 | User Manual - Page 21
    ● Texts in the < > brackets are the displays for the button guides. ● Some functions may not be available depending on the transceiver used. *1: *2: Functions available on NX-3200/ NX-3300 only. *3: Functions available on Mobile transceivers only. o None No function has been programmed. o 2-tone
  • Kenwood NX-3200 | User Manual - Page 22
    Battery Level Tone has been enabled, a beep tone will sound according to the number of flashes from the LED. o Bluetooth Enables or disables the Bluetooth function. Refer to "Bluetooth" {p. 56} . o Bluetooth Connect/ Disconnect Press this button to pair with the selected
  • Kenwood NX-3200 | User Manual - Page 23
    , Monitor Momentary, Squelch Off, Squelch Off Momentary and Zeroize buttons as well as PTT button on an external microphone or a Bluetooth device. * Your dealer can program the Selector to lock upon pressing this button. However, the locking of the Selector is available only on the Full button and
  • Kenwood NX-3200 | User Manual - Page 24
    o Channel Down Press this button to decrease the channel number. {p. 4} o Channel Entry Press this button to enter Channel Entry Mode, to select a channel. o Channel Information Allows you to cycle through the display information as follows: Channel name > Zonechannel number
  • Kenwood NX-3200 | User Manual - Page 25
    the FPU (Field Programming Unit) software or a computer is not available. o Function Press this button, then press a programmable button to activate its secondary function. o GPS Enables or disables the GPS function. o GPS/ Bluetooth Reset Activates GPS/ Bluetooth
  • Kenwood NX-3200 | User Manual - Page 26
    Power Turns High Transmit Power on or off. When using a channel programmed with low or medium power, this allows you to change the output power to Home> Press this button to jump to your home zone and channel (pre-programmed by your dealer). If activated by your dealer, you can set your own
  • Kenwood NX-3200 | User Manual - Page 27
    when constructing the system or during maintenance. o Manual Site Hunt Enables or disables Manual Site Hunt function. Applicable to DMR Site Roaming only. o Medium Transmit Power Turns Medium Transmit Power on or off. When using a channel programmed with low or high power, this allows you
  • Kenwood NX-3200 | User Manual - Page 28
    o OVCM (Open Voice Channel Mode) Allows the conversation of a received call to be heard even when the received ID does not match. o Playback Refer to "Playback" {p. 67} . o Playback (Last Recording) Refer to "Playback" {p. 67} . o Priority-channel Select Allows you to
  • Kenwood NX-3200 | User Manual - Page 29
    the Scan List and Priority channels using your transceiver. Refer to "SCAN PROGRAMMING" {p. 34} . o Scrambler/ Encryption Allows you When using the NX-3720G, NX-3720HG, NX-3820G, NX-3820HG, you must connect a KRA-40 GPS antenna. ● When using the NX-3720, NX-3720H, NX-3820, NX-3820H, you
  • Kenwood NX-3200 | User Manual - Page 30
    o Site Down Press this button to decrease the site number. o Site Lock Allows you to lock the current site. The transceiver will not be able to search for alternate sites, and "Site Lock" appears on the display. o Site Number This displays the site number. o Site Select Allows you
  • Kenwood NX-3200 | User Manual - Page 31
    the current Trunking site. With the site displayed, press and hold the button programmed as [System Search] to enter Search mode. The transceiver begins searching for a a Task Request message of which the operator will check the instructions in the message and return a response message such as task
  • Kenwood NX-3200 | User Manual - Page 32
    o TX Audio Equalizer (High) Allows you to set the audio response for high frequencies. o TX Audio Equalizer (High Midrange) Allows you to set the audio response for high midrange frequencies. o TX Audio Equalizer (Midrange) Allows you to set the audio response for midrange frequencies. o TX Audio
  • Kenwood NX-3200 | User Manual - Page 33
    is no longer present. When the signal "drops out", the transceiver will remain on the channel momentarily before Scan resumes. This delay time is programmed by your dealer. If a signal is received during the delay time, the transceiver will remain on the same channel. To stop scanning, press the
  • Kenwood NX-3200 | User Manual - Page 34
    display when a channel is added to the scan list, and disappears when a channel is removed from the scan list. 4 Press the [ ] button to exit scan programming. Note: ● A zone/ channel cannot be added to the scan list in the following cases. - When it has already been added to the scan list. - When
  • Kenwood NX-3200 | User Manual - Page 35
    the channel where the scan list to be edited has been set, press the button programmed as [Scan Program] to enter Scan Program Mode. Alternatively, press the button programmed as [Menu] to enter Scan Program Mode using the Menu Mode. 2 Press the [ ] button to edit the Priority channel. 3 Press the
  • Kenwood NX-3200 | User Manual - Page 36
    Keypad Auto PTT are available only on full button model Portable transceivers and Mobile transceivers with microphone with keypad. MAKING A DTMF CALL o Manual Dialing 1 Press and hold the PTT switch. 2 Enter the desired digits using the DTMF or microphone keypad. ● The corresponding DTMF tones sound
  • Kenwood NX-3200 | User Manual - Page 37
    ] or [ ] button to confirm your selection. 6 Press the [ ] button to exit Autodial Programming Mode. o Manual Dialing 1 Press the button programmed as [Autodial] to enter Autodial Mode. Alternatively, press the button programmed as [Menu] to enter Autodial Mode using the Menu Mode. ● The last called
  • Kenwood NX-3200 | User Manual - Page 38
    CALL (LTR TRUNKING) o Manual Dialing 1 Select the desired zone and telephone group ID. 2 Press the PTT switch to start the call. 3 Enter the desired number using the DTMF keypad. o Autodial 1 Select the desired zone and telephone group ID. 2 Press the button programmed as [Autodial] to enter
  • Kenwood NX-3200 | User Manual - Page 39
    PF 1 (orange) button of the optional speaker/ microphone can be programmed with the Emergency function. (NX-3200/ NX-3300 only) Mobile ● Only the Auxiliary ( ) button can be programmed with the Emergency function. 1 Press and hold the button programmed as [Emergency]. ● Depending on the delay time
  • Kenwood NX-3200 | User Manual - Page 40
    ] button to set the new Scrambler code. SELECTING THE ENCRYPTION KEY 1 Press the button programmed as [Scrambler/ Encryption Code] to enter Scrambler/ Encryption Code Mode. Alternatively, press the button programmed as [Menu] to enter Scrambler/ Encryption Code Mode using the Menu Mode. 2 Select the
  • Kenwood NX-3200 | User Manual - Page 41
    DELETING THE ENCRYPTION KEY (AES/ DES or Enhanced Encryption only) 1 Press the button programmed as [Key Delete] to enter Key Delete Mode. Alternatively, press the button programmed as [Menu] to enter Key Delete Mode using the Menu Mode. 2 Select the Encryption key to be deleted using the [J] and
  • Kenwood NX-3200 | User Manual - Page 42
    can still hear your calls if they set up their transceiver with the same tone or code. o Operator Selectable Tone (OST) If a button has been programmed with [Operator Selectable Tone], you can reprogram the QT tone or DQT code on each of your channels. 1 Select your desired channel. 2 Press and hold
  • Kenwood NX-3200 | User Manual - Page 43
    Signaling opens the squelch only when your transceiver receives a call containing a matching 2-tone signal. 1 Press the button programmed as [2-tone]. ● Alternatively, you can press the button programmed as [Menu] to enter 2-tone Mode using the Menu Mode. 2 Press the [J] and [K] buttons to select
  • Kenwood NX-3200 | User Manual - Page 44
    will cause the clock time to clear. CLOCK ADJUSTMENT To set the time: 1 Press the button programmed as [Clock Adjustment] to enter Clock Adjustment Mode. Alternatively, press the button programmed as [Menu] to enter Clock Adjustment Mode using the Menu Mode. ● The current time setting appears
  • Kenwood NX-3200 | User Manual - Page 45
    LANGUAGE Your transceiver is equipped with multiple language support feature. You can change the language of the are dependent on the dealer setting. For details, consult your dealer. 1 Press the button programmed as [Menu] to enter Language Mode using the Menu Mode. 2 Press the [J]/[K] buttons to
  • Kenwood NX-3200 | User Manual - Page 46
    DISPLAY TYPE (Portable transceivers only) You can change the screen display to a simpler layout without the button guides. 1 Press the button programmed as [Menu] to enter Display Type Mode using the Menu Mode. 2 Press the [J]/[K] buttons to select "Normal Type" or "Simple Type". Normal Type
  • Kenwood NX-3200 | User Manual - Page 47
    JVC KENWOOD Corporation. FleetSync enables a variety of paging functions on your transceiver, some of which depend on dealer programming. Note the [J] and [K] buttons to select the station you want to call. ● If Manual Dialing is enabled, you can enter the station ID by using the keypad on a full
  • Kenwood NX-3200 | User Manual - Page 48
    the [J] and [K] buttons to select the station you want to call. ● If Manual Dialing is enabled, you can enter the station ID by using the keypad on ● The category list is displayed. However, depending on the stack settings programmed by your dealer, the individual list (Caller ID, Status Message or
  • Kenwood NX-3200 | User Manual - Page 49
    to a PC. Ask your dealer for details. ● Long messages can contain a maximum of 4096 characters. GPS REPORT GPS data can be manually transmitted by pressing the button programmed as [Send the GPS Data], or by accessing the Menu {p. 9} . If set up by your dealer, GPS data may be automatically
  • Kenwood NX-3200 | User Manual - Page 50
    the [J] and [K] buttons to select the station you want to call. ● If Manual Dialing is enabled, you can enter the station ID by using the keypad on a o Transmitting 1 Select your desired zone and channel. 2 Press the button programmed as [Status] to enter Status mode (proceed to step 5), or [
  • Kenwood NX-3200 | User Manual - Page 51
    [J] and [K] buttons to select the status you want to transmit. ● If Manual Dialing is enabled, you can enter the status ID by using the keypad on Portable transceiver or on the microphone of a Mobile transceiver. 6 Press the button programmed as [Call 1] to [Call 6] to initiate the call. o Receiving
  • Kenwood NX-3200 | User Manual - Page 52
    , you must use an optional headset connected via the Bluetooth Headset Profile. Refer to "Bluetooth" {p. 56} . Microphones such as KMC-28 cannot to the accessory terminal of the transceiver. 2 Press and hold the button programmed as [VOX]. ● Alternatively, you can press the button programmed as
  • Kenwood NX-3200 | User Manual - Page 53
    used to prevent any caller from using a channel for an extended period of time. If you continuously transmit for a period of time that exceeds the programmed time, the transceiver will stop transmitting and an alert tone will sound. To stop the tone, release the PTT switch. Your dealer can
  • Kenwood NX-3200 | User Manual - Page 54
    wait until the channel becomes free. However, if BCL Override has also been programmed, you can transmit over the current signal: 1 Press and hold the PTT " appears on the display. If enabled by your dealer, an In-service Tone will sound when an available control channel is detected after the out
  • Kenwood NX-3200 | User Manual - Page 55
    the status, the new status is announced. ● When changing the function setting, the new setting is announced. VIBRATOR (For Portable transceivers NX-3200/NX-3300 only) When an optional external vibrator (KCT-48VU External Vibration Unit) is installed, the vibrator function will alert you when an
  • Kenwood NX-3200 | User Manual - Page 56
    Description Headset Profile provides support for Bluetooth headsets to be used with this transceiver for making voice calls. Serial Port Profile allows this transceiver to connect to a Bluetooth-enabled PC without using a programming cable to communicate with the Field Programming Unit (FPU) or to
  • Kenwood NX-3200 | User Manual - Page 57
    supports Heart Rate Service or Automatic Injury Detection Service is connected to the transceiver. o Selecting the Bluetooth headset type You can select the type of Bluetooth headset to be connected to the transceiver via HSP connection. 1 Press the button programmed as [Menu] to enter Bluetooth
  • Kenwood NX-3200 | User Manual - Page 58
    ON/ OFF Press the button programmed as [Bluetooth] to turn the Bluetooth function on or off. Alternatively, press the button programmed as [Menu] to enter Bluetooth Mode using the Menu Mode. Press the [J] and [K] buttons to select "On" or "Off". Press the [ ] or [ ] button to confirm your selection
  • Kenwood NX-3200 | User Manual - Page 59
    the [ ] or [ ] button to start pairing. Alternatively, you can pressed the button programmed as [Bluetooth Connect/ Disconnect]. ● The LED indicator blinks in blue. ● For Bluetooth devices that does not support Simple Secure Pairing, you need to enter a Personal Identification Number (PIN) code. You
  • Kenwood NX-3200 | User Manual - Page 60
    The pressing of the button programmed as Bluetooth Connect/ Disconnect does not affect the status of the Bluetooth connection via Serial Port Profile or Bluetooth Low Energy (Heart Rate Service, Automatic Injury Detection Service, Device Information Service and Battery Service). o Making hands-free
  • Kenwood NX-3200 | User Manual - Page 61
    transceiver and to switch the speaker audio output. o Connecting/ Disconnecting/ Deleting a registered device using My Devices Press the button programmed as [Menu] to enter Bluetooth My Devices Mode using the Menu Mode. To connect a device: 1 Press the [J] and [K] buttons to select the device to
  • Kenwood NX-3200 | User Manual - Page 62
    To disconnect a device: 1 Press the [J] and [K] buttons to select the device to disconnect. 2 Press the [ ] or [ ] button to disconnect. 3 Press the [ ] or [ ] button to confirm the disconnection. ● The " " indicator and "Disconnected" appear on the display. To delete a device: Note: ● Make sure the
  • Kenwood NX-3200 | User Manual - Page 63
    button programmed as [Menu] to enter Bluetooth Bluetooth-enabled device that supports Device Information Service. Firmware Ver. : The firmware version of a registered Bluetooth-enabled device that supports Device Information Service. Software Ver. : The software version of a registered Bluetooth
  • Kenwood NX-3200 | User Manual - Page 64
    Service and Automatic Injury Detection Service. They are not applicable to the Serial Port Profile connection. o Switching the speaker audio output You can switch the audio output between the speaker of the transceiver and the Bluetooth headset. Portable Press the button programmed as [Bluetooth
  • Kenwood NX-3200 | User Manual - Page 65
    Injury Detection Service) connection. The Bluetooth device has rejected a request for pairing, Headset Profile (HSP) connection or Bluetooth Low Energy (Heart Rate Service, Automatic Injury Detection Service) connection. (Display for 1 second) The Bluetooth device does not support Headset Profile
  • Kenwood NX-3200 | User Manual - Page 66
    turned off in the following situations: - When the battery runs out - When the battery pack is removed from the Portable transceiver - When the power cable is unplugged on the Mobile transceiver ● You can play back the voice recording in Playback mode, or delete the recording if necessary. ● If Auto
  • Kenwood NX-3200 | User Manual - Page 67
    , press the [H]/ [I] button. Press and hold the button to fast-forward or rewind. o To play back the last recording directly Press the button programmed as [Playback (Last Recording)] to play back the latest audio data recorded using the Auto Recording function. o To delete a recording 1 Press the
  • Kenwood NX-3200 | User Manual - Page 68
    mode (Analog Channel) In Digital mode (Mixed Channel) In Analog mode (Mixed Channel) Connected to a Bluetooth device. The Bluetooth function is activated. Blinks in the process of turning on Bluetooth. The GPS position is determined. Blinks when the GPS is unable to determine the position. Scan
  • Kenwood NX-3200 | User Manual - Page 69
    is programmed as supported. *2 Mobile: Supported models: NX-3720G, NX-3720HG, NX-3820G, NX-3820HG only. Portable: Supported models: NX-3200, NX-3300 only. (For C type) All models supported. (For K/E type) *3 Mobile: Supported models: NX-3720HG, NX-3820HG only. Portable: Supported models: NX-3200, NX
  • Kenwood NX-3200 | User Manual - Page 70
    © 2019
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
NX-3000 series
USER MANUAL
B5A-2074-00/04