Kenwood NX-3200 User Manual - Page 40
Scrambler (analog/ Ltr)/ Encryption (nxdn/ Dmr), Secure Encrypted Transmission
View all Kenwood NX-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (NXDN/ DMR) Note: ● The Scrambler function can be used only in Analog Conventional and LTR Trunking Operation. ● The following types of encryption are available depending on the system used. NXDN : Bit scrambling (built-in encryption function), 56-bit DES and 256-bit AES DMR : Bit scrambling (built-in encryption function), 56-bit DES, 256-bit AES and Enhanced Encryption ● Ask your dealer for details concerning the Encryption DES/ AES and Enhanced Encryption settings. SECURE (ENCRYPTED) TRANSMISSION Press the button programmed as [Scrambler/ Encryption] to switch the transceiver to secure (encrypted) transmission. Alternatively, press the button programmed as [Menu] to enter Scrambler/ Encryption Mode using the Menu Mode. ● The Scrambler indicator ( ) or Encryption indicator ( )* appears when the respective function is turned ON. ● Pressing the PTT switch after the Scrambler or Encryption function has been turned ON encrypts the transmitted signal. * The indicator displayed varies depending on the type of Encryption function activated. Refer to "INDICATOR LIST" {p. 68} . SELECTING THE SCRAMBLER CODE 1 Press the button programmed as [Scrambler/ Encryption Code] to enter Scrambler/ Encryption Code Mode. Alternatively, press the button programmed as [Menu] to enter Scrambler/ Encryption Code Mode using the Menu Mode. 2 Press the [J] and [K] buttons to increase or decrease the Scrambler code. ● Up to 16 Scrambler codes can be used. 3 Press the [ ] or [ ] button to set the new Scrambler code. SELECTING THE ENCRYPTION KEY 1 Press the button programmed as [Scrambler/ Encryption Code] to enter Scrambler/ Encryption Code Mode. Alternatively, press the button programmed as [Menu] to enter Scrambler/ Encryption Code Mode using the Menu Mode. 2 Select the new Encryption key using the [J] and [K] buttons. ● Up to 32 Encryption keys can be used. One of these keys will be used during transmission. 3 Press the [ ] or [ ] button to set the new Encryption key. Note: ● In NXDN systems, a key error will be displayed when a Key ID which is 0x40 and above is selected for the AES/DES encryption function. ● To restore to the default Encryption key, select "Preset". However, if you delete the Encryption key, it will not be recovered. 40