Kenwood NX-3727HG User Manual - Page 7

4 Mount the microphone hanger in a location where it will be within easy reach of the user. • The microphone and microphone cable should be mounted in a place where they will not interfere with the safe operation of the vehicle. When replacing the fuse in the DC power cable, be sure to replace it with a fuse of the same rating. Never replace a fuse with one that is rated with a higher capacity. HOT SURFACE Do not touch the metal surface of the transceiver while it is in use. Do not mount the transceiver such that the chassis can come in contact with skin. High temperatures may burn your skin. Flat washer Spring washer 5 x 16 mm Selftapping screw Microphone M4 x 6 mm hex-headed screw with washer RF antenna connector Mounting bracket Power input connector DC power cable External GPS antenna connector for KRA-40 speaker jack Black (-) cable Red (+) cable Fuse 12 V vehicle battery 7