Kenwood PKT-23 Operation Manual 2 - Page 19

Note: ◆ When the battery pack voltage becomes too low, transmission will stop and an alert tone will sound. (Low Battery Warning: While operating the transceiver, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red when the battery needs recharged or replaced.) ◆ Even when setting the volume to 0, the transceiver will continue to emit beep sounds and channel announcements. ◆ Continuously transmitting when the transceiver becomes too hot will cause the output power to decrease and may eventually stop transmission. Stop transmitting for a while to allow the transceiver to cool down. ◆ You may sometimes hear noise during communications, depending on the caller's transceiver. LED INDICATOR STATUS Indicator Color Red Green Blinking green Blinks light blue 1 time Blinking red Meaning Transmitting Receiving a call Scanning Standby state * Battery power is low * The transceiver has not been used for at least 10 seconds. BATTERY LEVEL GUIDE You can determine the remaining battery power level by pressing the Power switch while the transceiver power is ON. The LED indicator will blink blue a number of times corresponding to the battery power remaining. Indicator Status Blinks 3 times Blinks 2 times Blinks 1 time Battery Level High Medium Low 11