Kenwood TH-D72 User Manual 1 - Page 49
Aprs - 6, Display Filter Function, Receiving A Message
View all Kenwood TH-D72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
DISPLAY FILTER FUNCTION This function allows you to display only the specified types of data from the station list. 1 Press [LIST] and display the list of stations. 2 Press [MENU] and display the station list menu. • After the display filter function is turned ON, received data is added to the list but will on be displayed if it matches the filter type selected. • For example, with the station list displayed and the display filter selection set to "Weather", all stations not relating to weather are no longer displayed. If mobile station data is received at this time, the new data will also not be displayed as long as the weather filter is active. 3 Press [ ]or rotate the Tuning control to select [Filter], then press [ OK]. RECEIVING A MESSAGE Each time a proper message is received, the frequency display is interrupted to show information as below: First page: • The filter type list appears on the display. Last page: 4 Press [ ]/[ ]or rotate the Tuning control to select a filter type, then press [ OK]. • "Filtering" appears on the display and filtering begins. All(Off) The filtering function is cancelled, displaying all stations. Digipeater Only Digipeater Stations are displayed. Weather Only Weather Stations are displayed. Mobile Only Mobile Stations are displayed. Object Only Object Stations are displayed. KENWOOD Only Kenwood TH-D72, TH-D7, TM-D700, TM-D710, and RC-D710 Stations are displayed. NAVITRA Only Navitra Stations starting from $PNTS are displayed. QSY (Freq) Only stations containing frequency (QSY) data are displayed. 1-Way Only the message incapable MicEncoder format stations and the GPS trackers are displayed. Others Stations other than those listed above are displayed. 5 The newly filtered station list appears on the display. Status Indicator Meaning Indicator RX or TX Indicator Callsign (TX) Message TX/RX date Receive time Line number • The display shows up to 67 characters (24 characters by one page) of the message. • The following indicators appear depending on the types of received messages: Status n 1 "n" indicates the remaining number of times for transmitting the message (or bulletin). 1 A message for which a reception acknowledgment was returned A message (or bulletin) transmitted 1 5 times (For a message, a reception acknowledgment was not returned.) Meaning Message addressed to you Bulletin message Report by the National Weather Service RX or TX Received message (or bulletin) A message (or bulletin) for transmitting 1 These indicators appear for outgoing messages (or bulletins). APRS - 6