Kenwood TK-3101K Service Manual - Page 3
Realignment
View all Kenwood TK-3101K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
REALIGNMENT TK-3101 1 Modes User Mode PC Mode Self programming Mode Manufacture Mode MODE User Mode PC Mode Self programming Mode Manufacture Mode FUNCTION Use this mode for normal operation. Use this mode, to make various settings by means of the FPU through the RS-232C port. Use this mode for setting the channel contents. Use this mode, to realign the various settings through the RS-232C port during manufacture work. 2 How to enter each mode MODE User Mode PC Mode Self programming Mode FUNCTION Power ON Connect to the IBM PC compatible machine and controled by the FPU. [PIT] + [MONI] + Power ON 3 Getting acquainted Antenna Microphone 4 5 Speaker KEMY000 2 Speaker/ microphone jacks CO PTT (Push-To-Talk) switch Press this switch, then speak into the microphone to call a station. Release the switch to receive. Monitor key Press and hold to monitor how busy the current channel is and to monitor signals being received that do not contain the matched OT/DOT code. 3 Channel selector Rotate to select channels 1 - 15. © LED indicator Lights red while transmitting, green while receiving a signal, and orange while in setup mode. Flashes red when the battery voltage is low while transmitting. OO Power switch/ Volume control Turn clockwise to switch the transceiver ON. Turn counterclockwise until a click sounds, to switch the transceiver OFF. Rotate to adjust the volume level. 3