Kenwood TK-3173 Instruction Manual - Page 35
Scan Delete/Add
View all Kenwood TK-3173 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
ADD TO SCAN/ DELETE FROM SCAN Press the key programmed as Scan Delete/Add, to add or remove each channel/ group ID to or from the scan sequence. • The channel/ group ID add indicator ( ) will appear on the display when the selected channel/ group ID is added to the scan sequence. Press and hold the key programmed as Scan Delete/Add, to add or remove each zone to or from the scan sequence. • The zone add indicator ( ) will appear on the display when the selected zone is added to the scan sequence. PRIORITY SCAN The Priority channel must be programmed in order for Priority Scan to function. The transceiver will automatically change to the Priority channel when a signal is received on it, even if a signal is being received on a normal channel. • The indicator appears on the display when the selected channel is the Priority channel. Note: Priority cannot be programmed onto the group ID of a Trunking zone; it can be used only on channels of Conventional zones. GROUP SCAN (TK-3173 ONLY) Group Scan is useful when more than one group ID is programmed in a zone. Group Scan is set by your dealer on request. It scans the revert groups as well as groups that are allowed to be scanned. When a call is received, the group indicator shows the group ID, and that group becomes the revert group. Simply press the PTT switch to respond to the call. 25