Kenwood TK 3200U2P Instruction Manual - Page 26

CHANNEL OPERATING FREQUENCIES To change the operating frequency of a channel: With the transceiver power OFF, press and hold the PTT switch and Lock key 1 while turning the transceiver power ON. 1 Continue to hold the PTT switch and Lock key until the LED lights orange and the transceiver announces "Self". Release the PTT switch and Lock key. 2 The transceiver announces "Channel". Pressing the Lock key or Scan key will toggle between QT, DQT, and Channel setup. Press and release the PTT switch, then rotate the Channel selector to your desired channel. 3 1 Upon pressing and releasing the PTT switch, the transceiver announces "Table zero". Press the Lock key to increment the Table number or the Scan key to decrement the number, to select the new channel frequency. Press and hold the Lock or Scan key to 4 increment/ decrement the number by 5 at a time. Table numbers and their corresponding operating frequencies are provided in the table on page 19. A voice announcement will inform you of the currently selected Table number. 18