Kenwood XXV-01D User Manual - Page 43
Touch Sensor Tone, Manual Clock Adjustment - reset code
View all Kenwood XXV-01D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
• When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security" is displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "CODE" is also displayed. 4 Select the digits to enter Push the Control knob towards [4] or [¢]. 5 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "CODE" is also displayed. 8 Do the step 4 through 7 step operation, and reenter the security code. "Approved" is displayed. The Security Code function activates. • If you enter a Code different from your Security Code, you have to start over from step 4. 9 Exit Security Code mode Press the [MENU] button. Press the Reset button when the audio unit is removed from the battery power source 1 Turn the power ON. 2 Do the step 4 through 7 step operation, and reenter the security code. "Approved" is displayed. You can begin using the unit. After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code. Number of times the incorrect code was input 1 2 3 4 Input prohibited time - 5 minutes 1 hour 24 hours In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep: ON" "Beep: OFF" Setting Beep is heard. Beep canceled. In Standby mode Manual Clock Adjustment • You can do this adjustment when the (page 44) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards [4] or [¢]. Select the "Clock Adjust" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. • If an incorrect code is entered, "Waiting" is displayed, and the input prohibition periods shown in the table below is generated. English | 43