KitchenAid KBF042FTX Installation Guide - Page 16
Classic, Architect, and Overlay Series, Factory Panels and Kits 36 [91.4 cm] Models, Classic Series
View all KitchenAid KBF042FTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Classic, Architect®, and Overlay Series Factory Panels and Kits (36" [91.4 cm] Models) All factory parts are available through your KitchenAid dealer or by calling KitchenAid Parts and Accessories at 1-800-442-9991. In Canada, call 1-800-807-6777. Architect® Series 72" (183 cm) Top Grille Panel Kit A 72" (183 cm) wide Top Grille Panel Kit is available. This kit allows 2 units (one left-hand swing and one right-hand) to be installed side by side with a single grille. Color 72" (183 cm) Stainless Steel (Architect® Series) #W10153554 Refrigerator and Freezer Panels The freezer panel should not weigh more than 20 lbs (9.1 kg). The refrigerator panel should not weigh more than 50 lbs (22 kg). 34¹⁄₄" (87 cm) 49" (124.5 cm) Extended Door Handle Kits Use extended door handles when additional finger clearance is needed between the door handles and custom panel. Follow the kit instructions for installing the door handles. Color Left-Hand Swing Right-Hand Swing White (Classic Series) #4396119 #8171424 Black (Classic Series) #4396116 #8171427 Stainless Steel (Classic Series) #4396118 #8171425 Matte Aluminum Etched (Classic Series) #4396120 #8171423 Matte Aluminum (Overlay Series) #4396718 34¹⁄₄" (87 cm) 20¹⁄₈" (51.1 cm) Top Grille Panel - Routing Requirements If the custom panels are thicker than ¹⁄₄" (6.35mm), the top and bottom edges of the top panel should be edge routed ¹⁄₂" (1.27 cm) and ³⁄₈" (9.5 mm), respectively. Both ends should be edge routed 2.2 cm) as shown. Classic Series Custom Panels (36" [91.4 cm] Models) If you plan to install custom wood panels, you will need to create the panels yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications. IMPORTANT: Panels weighing more than recommended may cause damage to your refrigerator. NOTE: Dimensions shown have a 1.5 mm) tolerance. Panels that are more than ¹⁄₄" (6.35 mm) thick must be routed. If panels are less than ¹⁄₄" (6.35 mm) thick, install a filler panel between the door and the decorative panel. Top Grille Panel The top panel should not weigh more than 10 lbs (4.5 kg). 34¹⁄₂" (87.63 cm) 7¹⁄₄" (18.4 cm) ¹⁄₄" (6.35 mm) max. Top Grille ⁷⁄₈" (2.2 cm) Top Grille ¹⁄₄" (6.35 mm) max. ⁷⁄₈" (2.2 cm) 16