KitchenAid KBSD606ESS Installation Guide - Page 24
Complete Installation
View all KitchenAid KBSD606ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Complete Installation 1. Turn the water supply line valve to the "Open" position. 2. Turn the refrigerator switch to the ON position. See "Power On/Off Switch" in the Use & Care Guide for instructions. Wait a few minutes. Check the water line connections for leaks. 3. Remove all boxes, parts packages and packing materials from the interior of the refrigerator. See the "Cleaning" section in the Use & Care Guide for instructions. Remove the film and cardboard from the grille and doors or door frame, depending on your model. 4. Install the shelves and bins in the refrigerator and freezer compartments. 5. The controls are preset at the factory to the midpoint setting. Make sure the compressor is operating properly and that all the lights are working. 6. If construction will continue after the refrigerator has been installed, set the controls to OFF. To get the most efficient use from your new built-in refrigerator, read the Use & Care Guide. Keep Installation Instructions and Use & Care Guide near the built-in refrigerator for easy reference. 24