KitchenAid KBSN602EPA Installation Guide - Page 14
Stainless Steel and Overlay Series Both, and 42 models have the same, cabinet side trim
View all KitchenAid KBSN602EPA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Stainless Steel and Overlay Series Both 36" and 42" models have the same cabinet side trim All factory parts are available through your KitchenAid dealer or by calling KitchenAid Parts and Accessories at 1-800-442-9991. In Canada, call 1-800-807-6777. Overlay Series Door Handle Kits The following handle style is available. Contact your KitchenAid dealer or KitchenAid Parts and Accessories at 1-800-442-9991. In Canada, call 1-800-807-6777. Installation Dimensions - Option 1 1. Measure the distance from point A (as shown) to the back wall. Add 1⁄16" (1.6 mm) to this measurement to allow the side panel to fit into the trim. A 2. If the panel is more than 8.7 mm) thick, rout the front edge to allow the side panel to fit into the trim. Installation Dimensions - Option 2 1. Measure the distance from point A (as shown) to back wall. Knurl grip handle with chrome endcaps W10782871 - French Door Bottom Mount Handle Kit W10782874 - Two Door Bottom Mount Handle Kit Refrigerator and Side Trim Dimensions The width and height of a side panel are determined by the type of installation you are planning. NOTES: ■ The dimensions shown are actual product dimensions and may not reflect the needed panel installation dimensions. ■ The side panel should be a minimum of ¹⁄₂" (1.27 cm) thick to avoid warping. ■ If the opening depth is 25" (63.5 cm) or more, you may want to install a support board on the rear wall. Refrigerator A 2. Rout the front edge of the support board or attach a 8.7 mm) board to hold the panel in the cabinet side trim. 11/16" (18.0 mm) 1/2" (12.2 mm) 9/16" (13.9 mm) 5/8" (15.7 mm) 14