KitchenAid KCGS350ESS Owners Manual - Page 5

Key Usage Tips

Get KitchenAid KCGS350ESS PDF manuals and user guides View all KitchenAid KCGS350ESS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

KEY USAGE TIPS Propane Gas Conversion IMPORTANT: This cooktop is factory set for use with Natural gas. If you wish to use Liquid Propane call a licensed professional to install the Propane gas conversion kit (included). Placement of Burner Heads and Caps All burner caps and burner bases should be properly installed BEFORE operating the cooktop. Check that the right size head and cap is on the right size burner. Refer to the "Assembling Your Cooktop" section for proper burner head placement details. Lighting the Burners IMPORTANT: All burners will click/spark when a knob is pushed in. A burner will light only if the knob is pushed in and then turned counterclockwise to . To light the burners: 1. Push in the knob. 2. Turn the knob counterclockwise to . Wait until you see a flame. 3. Turn the knob anywhere between Hi and Lo to the desired setting. Power failure: In case of a power failure, burners can be lit manually. Hold a lit match near the burner and turn the knob counterclockwise to . Cleaning the Burners: Tips The burners should be kept clean. Spillovers should be cleaned immediately since they can clog the openings in the burners. IMPORTANT: Before cleaning, make sure all controls are off and the cooktop is cool. For more information, see the "Care and Cleaning" section. ■■ Remove the burner cap from the base. Clean the burner cap with hot soapy water and then rinse it. ■■ Remove the burner base and clean the gas tube opening under the base. ■■ Clean clogged burner ports with a straight pin, needle or small-gauge wire as shown. Do not use a wooden toothpick or clean in the dishwasher. ■■ Gently clean the igniter with a damp cloth. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
5
KEY USAGE TIPS
Propane Gas Conversion
IMPORTANT:
This cooktop is factory set for use with Natural gas.
If you wish to use Liquid Propane call a licensed professional to
install the Propane gas conversion kit (included).
Placement of Burner Heads and Caps
All burner caps and burner bases should be properly installed
BEFORE operating the cooktop. Check that the right size head
and cap is on the right size burner.
Refer to the “Assembling Your Cooktop” section for proper burner
head placement details.
Lighting the Burners
IMPORTANT:
All burners will click/spark when a knob is pushed
in.
A burner will light only if the knob is pushed in and then turned
counterclockwise to
.
To light the burners:
1.
Push in the knob.
2.
Turn the knob counterclockwise to
. Wait until you see a
flame.
3.
Turn the knob anywhere between Hi and Lo to the desired
setting.
Power failure: In case of a power failure, burners can be lit
manually. Hold a lit match near the burner and turn the knob
counterclockwise to
.
Cleaning the Burners: Tips
The burners should be kept clean. Spillovers should be cleaned
immediately since they can clog the openings in the burners.
IMPORTANT:
Before cleaning, make sure all controls are off and
the cooktop is cool. For more information, see the “Care and
Cleaning” section.
■
Remove the burner cap from the base. Clean the burner cap
with hot soapy water and then rinse it.
■
Remove the burner base and clean the gas tube opening
under the base.
■
Clean clogged burner ports with a straight pin, needle or
small-gauge wire as shown. Do not use a wooden toothpick
or clean in the dishwasher.
■
Gently clean the igniter with a damp cloth.