KitchenAid KCM1204OB Use & Care Guide - Page 13
Variable Warmth Control/Selectable, Automatic Shutoff, Using the Programmed Automatic, Brew Time
View all KitchenAid KCM1204OB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Using the Programmed Automatic Brew Time Again After setting up your Automatic Brew Time, you can use the following directions to reuse your previously programmed time setting. To re-activate the Programmed Automatic Brew Time: 1. Press the MENU button 1 time to enter the "Auto Brew Timer" mode. The "Auto" and "OFF" indicators will flash. Press the "+" (plus) or "-" (minus) button to select "ON". Press the SET button. 2. The hours digits will flash next. Press the SET button to set the hour. 3. The minutes digits will flash next. Press the SET button to set the minutes. 4. The "AM/PM" indicators will flash next. Press the SET to select AM or PM. Two short beeps will sound indicating programming is complete. 5. The "Auto" indicator will turn on and the coffee maker will begin brewing at the programmed time. The time that is set will be displayed for 3 seconds as a reminder of the set time. The programmed time will remain active until steps 1-4 are repeated or power is interrupted for more than 60 seconds. NOTE: To reactivate the programmed time, press and hold the BREW button. The "Auto" indicator will turn on and the coffee maker will begin brewing at the programmed time. Brew Strength The coffee maker can be programmed to brew coffee at regular (REG) or bold (BOLD) strengths. NOTE: If you do not complete the programming steps within 10 seconds, the settings will be maintained and the coffee maker will exit to the default mode. To program and activate the Brew Strength: 1. Press the MENU button 2 times to enter the "Brew Strength" mode. The "Brew Strength" indicator will flash until this programming cycle is complete. 2. T he strength (REG or BOLD) indicator will flash. Press the "+" (plus) or "-" (minus) button to select the brew strength desired (REG or BOLD). 3. P ress the SET button to program the Brew Strength setting. Two short beeps will sound, indicating programming is complete. The programmed strength will remain active until steps 1-3 are repeated or power is interrupted for more than 60 seconds. Variable Warmth Control/Selectable Automatic Shutoff For glass carafe models only, the coffee maker can be programmed to keep coffee warm for a specific length of time and temperature. This feature is not available on thermal carafe models. NOTE: If you do not complete the programming steps within 10 seconds, the settings will be maintained and the coffee maker will exit to the Default mode. To program and activate the Warm Timer/ Temperature setting: 1. P ress the MENU button 4 times to enter the "Warm Timer / Temperature" mode. The "Warm" indicator and time digits will flash until this programming cycle is complete. 2. P ress the "+" (plus) or "-" (minus) button to select the length of warm time desired. The time range can be selected between 0.5 and 4 hours in 30-minute increments. 3. P ress the SET button. The "Warm" indicator and temperature setting (LOW, MED, or HIGH) will flash. Press the "+" (plus) or "-" (minus) button to select the temperature (LOW, MED, or HIGH). 4. P ress the SET button to program the Warm Timer/ Temperature setting. Two short beeps will sound, indicating programming is complete. The programmed temperature will remain active until steps 1-4 are repeated or power is interrupted for more than 60 seconds. 13