KitchenAid KDFE104HBS Owners Manual - Page 9
Hi-Temp, Extended, Heat Dry, Rinse, 4-8 Hr., Delay, Control
View all KitchenAid KDFE104HBS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPTION SELECTIONS Hi-Temp Wash Sound on/off Hold 3 Sec Extended Heat Dry Heat Dry Sani Rinse 2-4-8 Hr. Delay Control Lock Hold 3 Sec OPTIONS Raises the main wash temperature to improve cleaning for loads containing tough, baked-on food. CAN BE SELECTED WITH ProWash™ Normal WHAT IT DOES ADDED TIME TO CYCLE Raises the main wash temperate up to 135°F (57°C). 0:00 to 0:30 ADDED WATER GALLONS (LITERS) 1.2 to 6.2 (4.8 to 23.3) Dries dishes with heat. This option, with the Available with Activates the Heat 0 use of rinse aid, will provide the best drying any cycle heating element at Dry: 0:10 performance. Plastic items are less likely to deform when loaded in the top rack. Turn the Heat Dry option off for an air dry. except Rinse Only the end of a wash cycle to speed drying times. Heat Dry defaults to On when any cycle is selected, except for Express Wash and Rinse Only. to 0:50 Extended Heat Dry (includes Heat Dry time): 0:40 to 1:20 Sanitizes dishes and glassware in accordance with NSF International NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Only sanitizing cycles have been designed to meet the requirements of the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy. There is no intention, either directly or indirectly, that all cycles on a NSF/ANSI 184 certified dishwasher meet the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy. The Sani Rinse indicator glows at the end of the cycle if the Sani Rinse option was successfully completed. If the indicator does not activate, it is probably due to the cycle being interrupted. ProWash™ Normal Increases the main wash temperature from 105°F (41°C) to 140°F (60°C) and the final rinse from 140°F (60°C) to 155°F (68°C). 0:00 to 2:20 1.2 to 6.2 (4.8 to 23.3) Runs the dishwasher at a later time or Available with Delays the start 0 0 during off-peak electrical hours. Select a any cycle of a cycle to the wash cycle and options. Press the Delay specified time. keypad. Press Start/RESUME. Close the door firmly. NOTE: Any time the door is opened (such as to add a dish), the Start/RESUME keypad must be touched again to resume the delay countdown. Use the Control Lock option to avoid unintended use of dishwasher between cycles, and option changes during a cycle. To turn on Control Lock, touch and hold Control Lock for 3 seconds. Control Lock light will stay on for a short time, indicating that it is activated. When the Lock indicator is lit, all keypad selections are disabled. If you touch any keypad selection while your dishwasher is locked, the light flashes three times. The dishwasher door can still be opened/closed while the controls are locked. To turn off Control Lock, touch and hold Control Lock for 3 seconds. Control Lock light turns off. 9