KitchenAid KDRS463VBU Installation Instructions - Page 16
If you need to release tubing, Connect to Water Filter Outlet blue, Connect to Home Water Supply,
View all KitchenAid KDRS463VBU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3. Attach filter to the mounting ring. Mounting ring and screw If you need to release tubing: Push in collet to release tubing. With collet held in, pull tubing straight out. A 1½" (3.8 cm) clearance Connect to Home Water Supply 1. Make connection to the cold water supply line. ■■ A leak-tight connection to the ¼" flexible codesapproved water supply line must be provided. ■■ Check local codes for type of connection required. ■■ Flexible codes-approved water supply line must be cut with a tubing cutter so the ends are concentric and without burrs. NOTE: It is recommended that the cold water line be soft water. Connect to Water Filter Inlet (yellow) NOTE: Use the quick-connect stem and/or elbow adapter fittings in the combination needed for your installation configuration. 1. Attach the supplied ³⁄8" to ¹⁄4" stem or ³⁄8" to ¹⁄4" elbow quick-connect adapter fitting to the yellow water filter inlet connection by pushing the quick-connect fitting past the O-ring until you hit the backstop. A B A. Collet Connect to Water Filter Outlet (blue) 1. Attach the supplied ³⁄8" to ¹⁄4" stem or ³⁄8" to ¹⁄4" elbow quick-connect adapter fitting to the blue water filter outlet connection by pushing the quick-connect fitting past the O-ring until you hit the backstop. 2. Connect another piece of flexible codes-approved water supply line to the quick-connect adapter fitting you just installed on the filter outlet (blue) side of the water filter. 3. Pull tube to ensure it is secured. Water supply tubing to range Sink Water supply connection Yellow WATER IN Shutoff valve Water supply tubing to cold water supply Blue WATER OUT Filter A. Quick-connect elbow adapter fitting B. Quick-connect stem adapter fitting 2. Connect the flexible codes-approved water supply line (not provided) from the home cold water supply pipe to the quick-connect adapter fitting you just installed on the filter inlet (yellow) side of the water filter. 3. Pull tube to ensure it is secured. A B C 4. Route flexible codes-approved water supply line through under-sink cabinet and oven cabinet cutout. A. ¼" water supply tubing B. O-ring C. Backstop 16