KitchenAid KDTE204ESS Installation Guide - Page 8
Prepare and Route Water Line
View all KitchenAid KDTE204ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Wood cabinet: Sand the hole until smooth. Metal cabinet: Cover edges of hole with grommet included with power cord kit. See the "Tools and Parts" section at the front of the guide for part details. Option B, Direct Wire Helpful Tip: Wiring the dishwasher will be easier if you route the cable into the cabinet opening from the right-hand side. Route cable from power supply through cabinet hole (cable must extend to the right front side of cabinet opening). Tape cable to the floor in area shown. This will prohibit cable from moving when dishwasher is moved into cabinet opening. Prepare and Route Water Line Helpful Tip: Routing the water line through the left-hand side of cabinet opening will make water connection easier. Drill a 1¹⁄₂" (3.8 cm) hole in right-hand cabinet side or rear. See the "Product and Cabinet Opening Dimensions" section. Drill a ¹⁄₂" (1.3 cm) hole in the cabinet side or rear. Wood cabinet: Sand the hole until smooth. Metal cabinet: Cover edges of hole with a grommet. See the "Tools and Parts" section at the front of the guide for part details. If using copper tubing, measure overall length of copper tubing required to reach the water supply, cut to length and attach compression fittings. If using flexible braided line, confirm braided line is of adequate length. See the "Tools and Parts" section at the front of the guide for part details and orders. 8