KitchenAid KDTE304DBL Installation Guide - Page 24

Complete Installation

Get KitchenAid KDTE304DBL PDF manuals and user guides View all KitchenAid KDTE304DBL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Complete Installation Option A, Install Access Panel - Plastic Panel Check that top of door does not contact screws, brackets or countertop. If it does, adjust leveling legs. Place the plastic access panel against the dishwasher leg. Open door and check that space between dishwasher cabinet opening and tub is equal on both sides. If spacing is not equal, loosen bracket screws and shift tub. Tighten bracket screws. Check that the lower edge of the access panel touches the floor. Adjust if necessary. If securing with a side attachment, check that sides of door do not rub against the screw heads. If they do, dishwasher must be re-centered. When dishwasher is properly centered, replace plastic buttons. If needed, see website for animated representation of this step. Visit www.kitchenaid.com/anchoring under FAQ tab. Using a flat-blade screwdriver, turn the fasteners ¹⁄₄ turn clockwise to lock into place. The fasteners slot will be straight up and down when properly locked. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
24
Check that top of door does not contact screws, brackets or
countertop. If it does, adjust leveling legs.
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws and shift tub. Tighten bracket screws.
If securing with a side attachment, check that sides of door do not
rub against the screw heads. If they do, dishwasher must be
re-centered. When dishwasher is properly centered, replace
plastic buttons.
If needed, see website for animated representation of this step.
Visit
www.kitchenaid.com/anchoring
under FAQ tab.
Complete Installation
Option A, Install Access Panel - Plastic Panel
Place the plastic access panel against the dishwasher leg.
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.
Using a flat-blade screwdriver, turn the fasteners
¹⁄₄
turn clockwise
to lock into place. The fasteners slot will be straight up and down
when properly locked.