KitchenAid KDTM384ESS Use & Care Guide - Page 11
Top Rack Only
View all KitchenAid KDTM384ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
OPTION SELECTIONS OPTIONS CAN BE SELECTED WITH WHAT IT DOES Raises the main wash temperature to improve cleaning for loads containing tough, baked-on food. (on some models) The upper rack has six retractable spray nozzles that reach into deeper items such as sports bottles, baby bottles or oddly shaped items. Flip the nozzles up to use them and down to move them out of the way. Sanitizes dishes and glassware in accordance with NSF International NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Only sanitizing cycles have been designed to meet the requirements of the NSF/ANSI 184 performance standard for soil removal and for sanitization efficacy. There is no intention, either directly or indirectly, that all cycles on a NSF/ANSI 184 certified dishwasher meet the NSF/ ANSI 184 performance standard for soil removal and for sanitization efficacy. The Sani indicator glows at the end of the cycle if the Sani Rinse option was successfully completed. If the indicator does not activate, it is probably due to the cycle being interrupted. (on some models) For added convenience, use for washing a small load of dishes in the top rack to help keep the kitchen continuously clean. ProWash™ Tough Normal ProWash™ Tough Normal Raises the main wash temperate from 105°F to either 130°F or 140°F (41°C to 55C° or 60C°). Bottle Wash nozzles ensure interior wash and rinse coverage inside taller items, such as bottles. ProWash™ Increases the main Tough Normal wash temperature from 105°F to 140°F (41°C to 60°C) and Top Rack Only the final rinse from 140°F to 155°F (60°C to 68°C). Available with Slightly faster wash any cycle for smaller loads ADDED TIME TO CYCLE*** (HH:MM) MIN MAX :00 :12 :03 :05 :10 :50 -:03 -:08 ADDED WATER GALLONS (LITERS) 0 - 1.5 (0 - 5.7) 0 0 - 1.5 (0 - 5.7) 0 or (on some models) Runs the dishwasher at a later time or Available with Delays the start 1:00 24:00 0 during off-peak electrical hours. Select a any cycle of a cycle to the wash cycle and options. Press the Delay specified time. button. Press START/RESUME. Close the door firmly. NOTE: Anytime the door is opened (such as, to add a dish), the Start/Resume button must be pressed again to resume the delay countdown. IMPORTANT: Control lock button varies by model. Your model may require you to press and hold PROSCRUB UPPER, 4 HOUR DELAY or BOTTLE WASH to lock the controls. The Control Lock light will turn on when the Control Lock is active. Use Control lock to avoid unintended use of the dishwasher between cycles, or cycle and option changes during a cycle. To turn on Lock, press and hold the control lock button designated for your model for 3 seconds. The Control Lock light will stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked. NOTE: You may need to disable Sleep Mode by pressing either Start/Resume or Cancel, or by opening and closing the door before you are able to turn Control Lock off. To turn off Control Lock, press and hold the control lock button designated for your model for 3 seconds. The light turns off. ***Cycle times may increase depending on water temperature, heavy soil condition, and options selected. Adding options will add time to the cycle. See the options information. 11