KitchenAid KDTM704ESS Installation Guide - Page 16
Custom Panel Installation, Choose Attachment Option
View all KitchenAid KDTM704ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
WARNING Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. Using a pair of pliers, bend the tab down to secure the bracket in place. Repeat this step for the other side. NOTE: Do not attach the dishwasher. This will be done later. Option B, Dishwasher Side Attachment NOTE: Remove the brackets from the parts package. Using 2 or more people, stand the dishwasher up. NOTE: Do not install kick plate until instructed to do so. Custom Panel Installation (Custom Panel models only) For custom panel installation, refer to the Custom Panel Installation Instruction Sheet (Part Number W10750117A). Complete custom panel installation before proceeding to the "Choose Attachment Option" section. Choose Attachment Option IMPORTANT: The dishwasher must be secured to the cabinet as one of the final steps. Prepare the dishwasher for this by attaching the two brackets found in the parts bag to the dishwasher. For countertops that are wood, laminate, or another similar surface, use Option A. For countertops that are marble, granite, or another hard surface, use Option B. Option A, Countertop Attachment Break off the end of the bracket along the scored line. With another person holding the rear of the dishwasher to keep it from tipping, open dishwasher door and place towel over pump assembly and spray arm of dishwasher. This will keep screws from falling into pump area when you are securing dishwasher to cabinet. Push the plastic buttons out of the side of the tub. NOTE: Save the buttons to cover the holes after dishwasher is installed. Remove the brackets from the package and insert into the open slots on the left-hand and right-hand top of the dishwasher collar, as shown. 16