KitchenAid KEBC167MSS Installation Guide - Page 5

INSTALLATION INSTRUCTIONS Prepare Built-In Oven 1. Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during installation. 3. Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove. Set the oven door aside on a covered work surface. WARNING Excessive Weight Hazard Use two or more people to move and install oven. Failure to do so can result in back or other injury. 2. To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. On models with shipping feet attached: To avoid product damage, do not remove the shipping feet at the front lower corners of the oven. The shipping feet will protect the lower oven trim until the oven is inserted into cabinet. 3. Remove the shipping materials and tape from the oven. 4. Remove the hardware package from inside the bag containing literature. 5. Remove and set aside racks and other parts from inside the oven. 6. Move oven and cardboard close to the oven's final location. Remove Oven Trim IMPORTANT: Use both hands to remove oven doors. 1. Open the oven door. 2. Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position. A B 4. Remove bottom screw on each side of the oven trim 5. Grasp the bottom end of trim and pull away from oven. A A. Remove trim screw and pull out. 6. Slide top end of trim downward to remove trim from oven. Set trim aside. A. Oven door latch in locked position B. Oven door latch in unlocked position 5