KitchenAid KEBC247KBL Use and Care Guide - Page 18
To Use, To Change Probe Temperature, Oven Setting, To Use Upper Oven with Probe and Lower Oven at
View all KitchenAid KEBC247KBL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
To Use: Before using, insert the probe into the center of the thickest portion of meat or into the inner thigh or breast of poultry, away from fat or bone. Place food in oven and connect the temperature probe to the jack. Keep probe as far away from heat source as possible. Close oven door. 1 2 1. Temperature probe 2. Temperature probe jack 1. On double ovens only, press UPPER OVEN. 2. Press the number pads to enter a probe temperature (internal temperature of food when done), if other than the default temperature of 160°F (71°C). The probe temperature may be set anywhere from 130°F to 190°F (54°C to 88°C). 3. Press BAKE, CONVECTION BAKE or CONVECTION ROAST. Press number pads to enter the oven temperature (from recipe), if other than the one displayed. 4. Press START. The set oven temperature will appear on the oven display throughout cooking. "Lo" will appear as the probe temperature until the internal temperature of the food reaches 130°F (54°C). Then the display will show the temperature increasing in 5°F (3°C) increments. When the set probe temperature is reached, the oven will shut off automatically and "End" will appear on the oven display. If enabled, end-of-cycle tones will sound, then reminder tones will sound every minute. 5. Press CANCEL OFF or UPPER OVEN CANCEL / OFF or open the oven door to clear the display and/or stop reminder tones. To Change Probe Temperature, Oven Setting: 1. Unplug probe, plug back in, then close oven door. 2. Follow steps 1 through 5 under the "To Use" section. To Use Upper Oven with Probe and Lower Oven at the Same Time: 1. Follow steps 1 through 4 under the "To Use" section. 2. Press LOWER OVEN. The probe's temperature setting will disappear from the display. 3. Press BAKE or BROIL. Press the number pads to enter a temperature other than the one displayed. 4. Press UPPER OVEN. The probe's temperature setting will reappear on the display. For the probe to work properly when using the lower oven, make sure to press the UPPER OVEN key to bring back the probe's temperature setting on the display each time a change has been made to the lower oven operation. 5. Press START. 6. Press CANCEL OFF or open the oven door to clear the display and/or stop reminder tones. 18