KitchenAid KEBS177SWH Installation Instructions - Page 3

ELECTRICAL REQUIREMENTS Electrical Shock Hazard - Electrical ground is required on this appliance. l Improper connection of the equipment-grounding electrical shock. conductor line can result in . Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded. Do Not modify the power supply cord plug. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. - Do Not use an extension cord with this appliance. Such use may result in a fire, electrical shock or other personal injury. . Do Not have a fuse in the neutral or ground circuit. A fuse in the neutral or ground circuit could result in an electrical shock. l This appliance must be connected to a grounded, metallic permanent wiring system; or a grounding conductor should be connected to the grounding terminal or lead on the appliance. Failure to do so could result in an electrical shock. I I It is the customer's responsibility tocontact adequate and in conformance with National ordinances. a qualified electrical installer Electrical Code, ANSliNFPA to assure that electrical installation is 70.latest edition and local codes and A 1201240.volt or 1201208 volt, 60 Hz, AC only, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided. It is the personal responsibility of the customer to have a properly grounded, 3-prong wall receptacle installed by a qualified electrician. The following amperage circuits must be provided. When installed in a mobile home, the installation must conform to the Manufactured Home Construction and Safety Standards, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24. HUD, Part 280) Model No KEBS177 KEBI140/141/170/171 KEBS145/146/176 SCO-1243/1273 SCO-243312733 KEBl240/270 SCO-224312273 KEBS277 KEBl241/271 KEBS24512461276 X0-2443/2743 TABLE 1 [ -%axlmum Wattage (KW) 240/208 Volt 3.713 0 I 3 813 0 I Fuse or Breaker Size Required 30 Amps I 6 O/5 0 c 7 315 8 7 516 0 40 Amps / _~--~~.~~