KitchenAid KECC568RPW Installation Guide - Page 6
Make Electrical Connection
UPC - 050946991498
View all KitchenAid KECC568RPW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
For 15" (38.1 cm) model only: WARNING Make Electrical Connection 1. Disconnect power. 2. Remove junction box cover, if present. 3. Connect the flexible cable conduit from the cooktop to the junction box using a UL listed or CSA approved conduit connector. 4. Tighten screws on conduit connector if present. 5. See "Electrical Connection Options Chart" to complete installation for your type of electrical connection. Electrical Shock Hazard Disconnect power before servicing. Use 12 gauge copper wire. Electrically ground cooktop. Failure to follow these instructions can result in death, fire, or electrical shock. For all models except 15" (38.1 cm) model: WARNING Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper wire. Electrically ground cooktop. Failure to follow these instructions can result in death, fire, or electrical shock. Electrical Connection Options Chart For cooktops with a 4-wire cable: If your home has: If your cooktop has: 4-wire 4-wire ¹⁄₂" (1.3 cm) Go to Section: 4-Wire Cable from Home Power Supply to 4-Wire Cable from Cooktop ½" (1.3 cm) 3-wire ¹⁄₂" (1.3 cm) 4-Wire Cable from Home Power Supply to 3-Wire Cable from Cooktop For cooktops with a 3-wire cable: 3-wire 4-wire ¹⁄₂" (1.3 cm) 3-Wire Cable from Home Power Supply to 4-Wire Cable from Cooktop ½" (1.3 cm) 3-wire ¹⁄₂" (1.3 cm) 3-Wire Cable from Home Power Supply to 3-Wire Cable from Cooktop This cooktop is manufactured with a frame connected, green or bare ground wire. Connect the cooktop cable to the junction box through the UL listed or CSA approved conduit connector. 6