KitchenAid KFXS25RYBL Use & Care Guide - Page 17
Product Data Sheets
View all KitchenAid KFXS25RYBL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
PRODUCT DATA SHEETS Base Grille Water Filtration System Model WF-L200V Capacity 200 Gallons (757 Liters) Model WF-NL120V Capacity 120 Gallons (454 Liters)) Tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Chlorine, Taste and Odor, Particulate Class lll*; and against ANSI/NSF Standard 53 for the reduction of Lead, Mercury, Benzene, and p-dichlorobenzene. This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42/53. Substance Reduction NSF Reduction Aesthetic Effects Requirements Chlorine Taste/Odor Particulate Class III* ≥50% ≥85% Contaminant Reduction NSF Reduction Requirements Lead: @ pH 6.5 Lead: @ pH 8.5 0.01mg/L 0.01mg/L Mercury: @ pH 6.5 Mercury: @ pH 8.5 0.002 mg/L 0.002 mg/L Benzene 0.0050 mg/L p-dichlorobenzene 0.075 mg/L Average Influent Influent Challenge Concentration Maximum Effluent 1.9 mg/L 2.0 mg/L ± 10% 0.07 mg/L 49,333/mL At least 10,000 particles/mL 640 mg/L** Average Influent Influent Challenge Concentration Maximum Effluent 0.14 mg/L*** 0.15 mg/L ± 10% 0.15 mg/L*** 0.15 mg/L ± 10% 0.0014 mg/L 0.0069 mg/L 0.0059 mg/L 0.006 mg/L ± 10% 0.0054 mg/L 0.006 mg/L ± 10% 0.0009 mg/L 0.0007 mg/L 0.0157 mg/L 0.015 ± 10% 0.002 mg/L 0.210 mg/L 0.225 ± 10% 0.0005 mg/L Average Effluent 0.06 mg/L 312 mg/L Average Effluent 0.0011 mg/L 0.0042 mg/L 0.0004 mg/L 0.00043 mg/L 0.00083 mg/L 0.0005 mg/L Minimum % Average % Reduction Reduction >75.0% 98.7% >75.0% 99% Minimum % Average % Reduction Reduction 99.0% 95.4% 99.21% 97.08% 84.74% 87.03% 92.47% 91.93% 87.26% 94.71% 99.76% 99.76% Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F (17.2°C). ■ It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised. ■ Model WF-L200V: The filter monitor system measures the amount of water that passes through the filter and alerts you to replace the filter. When 90% of the filter's rated life is used, the filter indicator light changes from green to yellow. When 100% of the filter's rated life is used, the filter indicator light changes from yellow to red, and it is recommended that you replace the filter. Use replacement cartridge L200V / NL120V, part #4396702. 2010 suggested retail price of $32.99 U.S.A./ $49.99 Canada. Prices are subject to change without notice. ■ Refer to the front cover or "Accessories" section for the Manufacturer's name, address and telephone number. ■ Refer to the "Warranty" section for the Manufacturer's limited warranty. Application Guidelines/Water Supply Parameters Water Supply Water Pressure Water Temperature Service Flow Rate City or Well 30 - 120 psi (207 - 827 kPa) 33° - 100°F (0.6° - 37.8° C) 0.5 GPM (1.89 L/min.) @ 60 psi. Model WF-NL120V: Change the water filter cartridge every 69 months. Use replacement cartridge L200V / NL120V, part #4396702. 2010 suggested retail price of $32.99 U.S.A./ $49.99 Canada. Prices are subject to change without notice. ■ The product is for cold water use only. ■ Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. *Class III particle size: >5 to