KitchenAid KG25H0XDR Owners Manual - Page 6
Getting Started With Your New Bowl-lift Stand Mixer
View all KitchenAid KG25H0XDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
USING THE STAND MIXER GETTING STARTED WITH YOUR NEW BOWL-LIFT STAND MIXER FOR DETAILED INFORMATION ON USING THE STAND MIXER Visit KitchenAid.com for additional Instructions with videos, inspiring recipes, and tips on how to use your Stand Mixer. For best performance, please go through these quick steps before using your Stand Mixer. Spring latch Locating pin 1 Make sure Stand Mixer is turned to the OFF position and is unplugged. Attach the bowl to the Stand Mixer. 2 Fit bowl supports over locating pins and press down on back of the bowl until bowl pin snaps into spring latch. IMPORTANT: If bowl is not securely snapped into place, it will be unstable and wobble during use. Pin Attach flat beater. Slip flat beater 3 onto the shaft. Turn left, hooking beater over the pin. Raise bowl to mixing position. Rotate bowl lift lever counter- 4 clockwise to the straight up position. The bowl must always be in the raised position when mixing. 6 | USING THE STAND MIXER