KitchenAid KGCS105GSS Installation Instructions - Page 3

Cooktop Size, Min. Base Cabinet Required, Minimum distance to, combustible surface, above countertop - dimension

Page 3 highlights

Countertop opening dimensions that are shown must be used. Given dimensions provide required clearances. Mobile home installation: The installation of this cooktop must conform to the Manufactured Home Construction and Safety Standards, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety; Title 24 HUD part 280); or when such standard is not applicable, the Standard for Manufactured Home Installations (Manufactured Home Sites, Communities and Setups), ANSI A225.1 - latest edition*, or with local codes. In Canada, the installation of this cooktop must conform with the current standards CAN/CSA-Z240 - latest edition**, or with local codes. Ả 1" (2.5 cm) min. space between adjacent cooktops See NOTE* for minimum clearances. 18" (45.7 cm) min. clearance upper cabinet to countertop within minimum clearances to cooktop Ấấ Ạ ả min. 13" (33 cm) recommended upper cabinet depth Ấ ạ Do not seal cooktop to countertop. 25" (63.5 cm) min.deep countertop is required Gas line opening - Wall: anywhere 5" (12.7 cm) ấ below underside of countertop. Cabinet floor: anywhere within 6" (15.2 cm) of rear wall is recommended. *NOTE: 24" (61 cm) min. clearance if bottom of wood or metal cabinet is protected by not less than 1/4" (0.6 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.04 cm) stainless steel, or 0.024" (0.06 cm) aluminum or 0.020" (0.05 cm) copper. 30" (76.2 cm) min. clearance between top of cooking platform and bottom of an unprotected wood or metal cabinet. Cooktop width 15" (38.1 cm) 30" (76.2 cm) 36" (91.4 cm) 43" (109.2 cm) Ạ 13-3/4" (34.9 cm) 29" (73.7 cm) 35-1/4" (89.5 cm) 42-3/4" (108.6 cm) ạ 19" (48.3 cm) Ả 15" (38.1 cm) 19" 30" (48.3 cm) (76.2 cm) 19" 36" (48.3 cm) (91.4 cm) 19" 42" (48.3 cm) (106.7 cm) ả 2-1/8" (5.4 cm) 2-1/8" (5.4 cm) 2-1/8" (5.4 cm) 2-1/8" (5.4 cm) ấ Grounded outlet - Locate within 24" (61 cm) of right rear corner of cutout. Minimum distance to combustible surface above countertop Ấ 2-7/8" (7.3 cm) ấ 5-5/8" (14.3 cm) 2-7/8" 5-5/8" (7.3 cm) (14.3 cm) 2-7/8" 5-5/8" (7.3 cm) (14.3 cm) 2-7/8" 11-1/2" (7.3 cm) (28.4 cm) Base cabinet size: Cooktop Size 15" (38.1 cm) 30" (76.2 cm) 36" (91.4 cm) 43" (109.2 cm) Min. Base Cabinet Required 15" (38.1 cm) 30" (76.2 cm) 36" (91.4 cm) 44" (111.8 cm) If cabinet has a drawer, a 4" (10.2 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required. The drawer depth may need to be shortened to avoid interfering with the regulator. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Cooktop Size
15" (38.1 cm)
30" (76.2 cm)
36" (91.4 cm)
43" (109.2 cm)
Min. Base Cabinet Required
15" (38.1 cm)
30" (76.2 cm)
36" (91.4 cm)
44" (111.8 cm)
Minimum distance to
combustible surface
above countertop
18" (45.7 cm) min.
clearance upper cabinet
to countertop within
minimum clearances to
cooktop
±²
Do not seal
cooktop to
countertop.
See NOTE*
for minimum
clearances.
1" (2.5 cm) min.
space between
adjacent cooktops
13" (33 cm)
recommended
upper cabinet
depth
³
±
²
´
min.
²
µ
3
Countertop opening dimensions
that
are shown must be used. Given
dimensions provide required clearances.
Mobile home installation:
The
installation of this cooktop must conform
to the Manufactured Home Construction
and Safety Standards, Title 24 CFR, Part
3280 (formerly the Federal Standard for
Mobile Home Construction and Safety;
Title 24 HUD part 280); or when such
standard is not applicable, the Standard
for Manufactured Home Installations
(Manufactured Home Sites, Communities
and Setups), ANSI A225.1 — latest
edition*, or with local codes.
In Canada, the installation of this cooktop
must conform with the current standards
CAN/CSA-Z240 — latest edition**, or with
local codes.
*NOTE:
24" (61 cm) min. clearance if bottom
of wood or metal cabinet is protected by not less
than 1/4" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet
steel, 0.015" (0.04 cm) stainless steel, or 0.024"
(0.06 cm) aluminum or 0.020"
(0.05 cm) copper.
30" (76.2 cm) min. clearance between top of
cooking platform and bottom of an unprotected
wood or metal cabinet.
If cabinet has a drawer, a 4" (10.2 cm)
depth clearance from the countertop to
the top of the drawer (or other obstruction)
in base cabinet is required.
The drawer
depth may need to be shortened to avoid
interfering with the regulator.
µ
³
´
±
²
15"
13-3/4"
19"
15"
2-1/8"
2-7/8"
5-5/8"
(38.1 cm)
(34.9 cm)
(48.3 cm)
(38.1 cm)
(5.4 cm)
(7.3 cm)
(14.3 cm)
30"
29"
19"
30"
2-1/8"
2-7/8"
5-5/8"
(76.2 cm)
(73.7 cm)
(48.3 cm)
(76.2 cm)
(5.4 cm)
(7.3 cm)
(14.3 cm)
36"
35-1/4"
19"
36"
2-1/8"
2-7/8"
5-5/8"
(91.4 cm)
(89.5 cm)
(48.3 cm)
(91.4 cm)
(5.4 cm)
(7.3 cm)
(14.3 cm)
43"
42-3/4"
19"
42"
2-1/8"
2-7/8"
11-1/2"
(109.2 cm)
(108.6 cm)
(48.3 cm)
(106.7 cm)
(5.4 cm)
(7.3 cm)
(28.4 cm)
Cooktop width
25" (63.5 cm) min.-
deep countertop is
required
Base cabinet size:
Gas line opening —
Wall: anywhere 5" (12.7 cm)
below underside of
countertop. Cabinet floor:
anywhere within 6" (15.2 cm)
of rear wall is recommended.
Grounded
outlet —
Locate within
24" (61 cm)
of right rear
corner
of cutout.