KitchenAid KMBD104GSS Owners Manual - Page 5

Electrical Requirements Observe all governing codes and ordinances. Required: ■■ A 120-volt, 60 Hz, AC-only, 15- or 20-amp electrical supply with a fuse or circuit breaker. Recommended: ■■ A time-delay fuse or time-delay circuit breaker ■■ A separate circuit serving only this microwave drawer GROUNDING INSTRUCTIONS I For all cord connected appliances: The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven. A short power supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. SAVE THESE INSTRUCTIONS This device complies with Part 18 of the FCC Rules. This device complies with Industry Canada ICES-001. PARTS AND FEATURES This manual may cover several different models. The model you have purchased may have some or all of the features shown here. The appearance of your particular model may differ slightly from the illustrations in this manual. C B D A E F G H I A. Microwave inlet cover - DO NOT REMOVE B. Control Panel C. OPEN and CLOSE controls D. Name plate: open the microwave drawer fully. The label is beyond the back wall of the microwave cavity facing up from the flat surface. E. Microwave drawer sealing surfaces F. Microwave drawer light G. Microwave drawer guides H. Vent I. Cooking Guide label 5