KitchenAid KMCS1016GSS Installation Guide - Page 4
Prepare Cutout/Cabinet Opening - installation
View all KitchenAid KMCS1016GSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Prepare Cutout/Cabinet Opening 1. On the cutout floor, find and mark the centerline. 2. Place the bottom duct in the opening, with the flange resting against the bottom front facing of the opening. 4. Mark the three mounting holes through the bottom duct onto the cutout floor. A B C A D E A. Cutout floor B. Centerline C. Bottom duct D. Bottom duct flange E. Front facing 3. Align the center arrows on the bottom duct with the centerline drawn in Step 1 above. B A. Short screws (3) B. Bottom duct mounting holes 5. Using 7/64" drill, drill pilot holes into the three holes marked in Step 4. 6. Realign and install the bottom duct with three short screws. 7. Using 7/64" drill, drill pilot holes through the four mounting holes of the bottom duct flange into the bottom front facing of the cutout/cabinet opening. A B A. Bottom duct flange B. Mounting holes A B A. Bottom duct B. Center arrows, aligned with centerline 4