KitchenAid KMHC319EBS Dimension Guide - Page 2

LOCATION REQUIREMENTS Special Requirements For Wall Venting Installation Only: • Cutout must be free of any obstructions so that the vent fits properly, and the damper blade opens freely and fully. For Roof Venting Installation Only: • If you are using a rectangular to round transition piece, 3" (7.6 cm) clearance needs to exist above the microwave oven so that the damper blade can open freely and fully. See "Rectangular to Round Transition" illustration in "Venting Design Specifications" section. PRODUCT DIMENSIONS INSTALLATION DIMENSIONS NOTE: The grounded 3 prong outlet must be inside the upper cabinet. See "Electrical Requirements" section. A B 30" (76.2 cm) min. 30" (76.2 cm) typical* 12" (30.5 cm) min. 14" (35.6 cm) max. upper cabinet and side cabinet depth 17¹⁄₈" (43.5 cm) (0.5 cm) 16¹⁄₄" (41.3 cm) 66" (167.6 cm) min. (42.15U6c³p⁄m₄t"o)* 29⁷⁄₈" (76.0 cm) * Overall depth of product will vary slightly depending on door design. A. 2" x 4" (5.1 x 10.2 cm) wall stud B. Grounded 3 prong outlet *30" (76.2 cm) is typical for 66" (167.6 cm) installation height. Exact dimension may vary depending on type of range/cooktop below. Because Whirlpool Corporation includes a continues commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Page of 2 Ref. W10724870A 2/10/15