KitchenAid KMT2203CA Use & Care Guide - Page 10

Special Toasting Functions A Little Longer If you have a preferred brownness setting but would like to toast something "a little longer", you can do so at the touch of a button, without changing your favorite setting. To use this feature after a toasting cycle is complete: 1. Wait for the food to raise automatically. A signal will sound. 2. If you desire more browning, just press A LITTLE LONGER and the food will resume toasting. 3. When the toaster is finished, it will automatically raise the food and a signal will sound. If food is not removed within 45 seconds, the toaster will enter Keep Warm mode. NOTE: This feature may also be used to extend the toasting time from the beginning of the cycle. 1. Insert bread or other food to be toasted in slot(s). 2. Wait for the bread to lower automatically, or press TOAST/CANCEL to start the cycle. 3. Press the A LITTLE LONGER button. 4. The toaster will extend toasting time. 5. When the toaster is finished, it will automatically raise the food and a signal will sound. If food is not removed within 45 seconds, the toaster will enter Keep Warm mode. Caring for Your Toaster 1. Unplug the toaster and let it cool before cleaning. 2. Grasp the center of the crumb tray then slide it out. Shake the crumbs into a waste container. It is recommended that the crumb tray be emptied after each use. Crumb tray is hand-wash only. IMPORTANT: The tray will be hot immediately following a toasting cycle. 3. Wipe toaster with a soft, damp cotton cloth. Do not use paper towels, abrasive cleansers or liquid cleaning products. Do not immerse toaster in water. NOTE: If grease or oil splatters on the toaster, wipe splatters away immediately using a clean, damp cotton cloth. 4. Return crumb tray to toaster. Press it in firmly until it clicks into position. Do not use the toaster without the crumb tray in proper position. NOTE: KitchenAid does not recommend the use of a toaster cover. 10