KitchenAid KODC304ESS Installation Instructions - Page 6
Install Oven
View all KitchenAid KODC304ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3-Wire Cable from Home Power Supply - U.S. Only IMPORTANT: Use the 3-wire cable from home power supply where local codes permit a 3-wire connection. A B C G H D E I F A. Cable from home power supply B. Junction box C. Black wires D. White wires E. Green (or bare) ground wire (from oven) F. 4-wire flexible cable from oven G. Red wires H. UL-listed wire connectors I. UL-listed or CSA-approved conduit connector 1. Connect the 2 black wires (C) together using a UL-listed wire connector. 2. Connect the 2 white wires (D) and the green (or bare) ground wire (of the oven cable) using a UL-listed wire connector. 3. Connect the 2 red wires (G) together using a UL-listed wire connector. 4. Install junction box cover. 2. Push against seal area of front frame to push oven into cabinet. A A. Shipping foot 3. Push oven completely into cabinet and center oven into cabinet cutout. 4. Securely fasten oven to cabinet using the # 8-14 x 1" screws (2 for single oven, 4 for double oven) provided. Insert the screws through holes in mounting rails. Do not overtighten screws. A Install Oven NOTE: Remove side and vent trims taped to oven before installing. 1. Using 2 or more people, lift oven partially into cabinet cutout. Use the oven opening as an area to grip. NOTE: Push against seal area of oven front frame when pushing oven into cabinet. Do not push against outside edges. A. # 8-14 x 1" screws 5. See the following instructions to install. ■ Insert the vent tabs (B) into slots (A) in the oven frame. ■ W ith one # 8-18 x ³⁄8" screw (C) for each side of the vent, fasten vent securely to the oven. AB D C A. Oven frame slot B. Vent tab C. # 8-18 x ³⁄8" screw D. Oven vent 6