KitchenAid KRSF505ESS Use & Care Guide - Page 20

REFRIGERATOR USE Recommended Freezer Temperature Cooling On/Off Your refrigerator and freezer will not cool when cooling is turned off. To turn cooling off, press and hold the LOCK and MEASURED FILL buttons at the same time for 3 seconds. When cooling is off, "Refrigeration Cooling is Off" will appear on the display screen as shown. IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time. Adjust Temperature Set Points Refrigerator set point range: 33°F to 45°F (0°C to 7°C). Freezer set point range: -5°F to 5°F (-21°C to -15°C). 1. Press and hold TEMPERATURE for 3 seconds to activate Temperature mode. 2. When Temperature mode is activated, press TEMPERATURE to select the Refrigerator zone. The display will show the temperature set point of the selected compartment as shown. 3. Press LOCK, under plus, to raise the set point, or press OPTIONS, under minus, to lower the set point. 4. When you have finished adjusting the refrigerator set point, press TEMPERATURE to change the display to show the freezer set point. When the zone has been changed, "FREEZER" appears on the display screen. 5. Press LOCK, under the plus button, to raise the set point, or press OPTIONS, under the minus button, to lower the set point. Save/Confirm Temperature Settings When you have finished adjusting both the refrigerator and freezer set points, press MEASURED FILL "Confirm" to save the settings. NOTE: To exit Temperature mode without saving changes, press the ICE MODE button under Back at any time, or allow about 60 seconds of inactivity. The temperature mode will turn off automatically and return to the normal screen. When adjusting temperature set points, use the following chart as a guide: CONDITION: TEMPERATURE ADJUSTMENT: REFRIGERATOR too cold REFRIGERATOR Setting 1° higher REFRIGERATOR too warm REFRIGERATOR Setting 1° lower FREEZER too cold FREEZER Setting 1° higher FREEZER too warm / Too little ice FREEZER Setting 1° lower A. Press LOCK and MEASURED FILL at the same time. To turn cooling back on, press and hold LOCK and MEASURED FILL for 3 seconds again. COOLING IS OFF will disappear from the display screen. Options Press the OPTIONS button to open the Options menu and select between Max Cool, Max Ice and Water Filter Status. Press the ICE MODE button at any time to return to the normal screen. Max Cool The Max Cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures. To turn on the Max Cool feature, press the OPTIONS button to enter Options mode, and then press the LOCK button, under Max Cool, to activate the feature. When the feature is on, the Max Cool icon will appear on the dispenser display screen. The Max Cool feature will remain on for 24 hours unless manually turned off. To manually turn off the Max Cool feature, press the OPTIONS button to enter Options mode (unless you are already in Options mode), then press LOCK again. When the feature has been turned off, the Max Cool icon will disappear from the dispenser display. NOTE: Setting the freezer to a colder temperature may make some foods, such as ice cream, harder. 20