KitchenAid KSCK25FVMS Use & Care Guide - Page 3

■ The display screen on the dispenser control panel has a backlight, which will turn off automatically when the control buttons have not been used for 30 seconds or more. When the backlight is off, the first press of a control button will only reactivate the backlight, without changing any settings. Within 30 seconds after the backlight has been reactivated, additional presses of control buttons will change the applicable settings. Adjusting the Controls To adjust the set points, press and hold the COOLING button for 3 seconds. When adjust mode is activated, set points and adjusting information will appear on the display screen. Additional Features NOTE: The display screen on the dispenser control panel has a backlight, which will turn off automatically when the control buttons have not been used for 30 seconds or more. When the backlight is off, the first press of a control button will only reactivate the backlight, without changing any settings. Within 30 seconds after the backlight has been reactivated, additional presses of control buttons will change the applicable settings. Max Cool and Max Ice The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures. The Max Ice feature assists with temporary periods of heavy ice use by increasing ice production. NOTE: To view Celsius temperatures, press the FILTER button when adjust mode is activated. To return the display setting to Fahrenheit, press FILTER again. Refrigerator Controls When adjust mode is activated, the LOCK and OPTIONS buttons adjust the refrigerator compartment temperature. The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C). ■ Press LOCK to lower the set point. ■ Press OPTIONS to raise the set point. Freezer Controls When adjust mode is activated, the ICE and LIGHT buttons adjust the freezer compartment temperature. The set point range for the freezer is -5°F to 5°F (-21°C to -15°C). ■ Press ICE to lower the set point. ■ Press LIGHT to raise the set point. CONDITION: TEMPERATURE ADJUSTMENT: REFRIGERATOR too cold REFRIGERATOR Setting 1° higher REFRIGERATOR too warm REFRIGERATOR Setting 1° lower FREEZER too cold FREEZER Setting 1° higher FREEZER too warm/too little ice FREEZER Setting 1° lower Press COOLING to exit adjust mode, or allow about 15 seconds of inactivity and adjust mode will turn off automatically. ■ Press the OPTIONS button to turn on the Max Cool feature. When the feature turns on, the arrow next to the "MAX COOL" icon will rotate on the dispenser display. The Max Cool setting will remain on for 24 hours unless manually turned off. ■ Press OPTIONS again to turn off Max Cool and turn on the Max Ice feature. When the feature turns on, the arrow next to the "MAX ICE" icon will rotate on the dispenser display. The Max Ice setting will remain on for a minimum of 90 minutes unless manually turned off. ■ Press OPTIONS a third time to activate Max Cool and Max Ice at the same time. When both features are activated, both the "MAX COOL" and "MAX ICE" arrows will rotate on the dispenser display. ■ Press OPTIONS a fourth time to turn both Max Cool and Max Ice off. When Max Cool and/or Max Ice are active, the temperature display will not change. After 24 hours, the refrigerator returns to the previous temperature set points. NOTE: If increased ice production is desired at all times, change the freezer control to a lower setting. Setting the freezer to a colder temperature may make some foods, such as ice cream, harder. Holiday Mode Holiday Mode is designed for those whose religious observances require turning off the lights and dispensers. In Holiday Mode, the temperature set points remain unchanged, but the interior and dispenser lights turn off, all sounds and alarms are disabled, the dispenser display screen backlight turns off, and the dispenser levers are disabled. ■ To turn on Holiday Mode, press and hold the COOLING button for 3 seconds to enter adjust mode. Then press and hold ICE and LIGHT at the same time for 3 seconds. When the feature turns on, "Holiday Mode" will appear on the dispenser display. ■ To turn Holiday Mode off, press and hold OPTIONS for 3 seconds. Temperature Display Always On This feature keeps the temperature display on at all times. ■ Press and hold COOLING and LOCK at the same time for 3 seconds to turn the feature on. IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time. 3