KitchenAid KSM150PSCU Owners Manual 1 - Page 6
Product Assembly
View all KitchenAid KSM150PSCU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
PRODUCT ASSEMBLY 3 4 1 2 Place the Bowl* on the Clamping Plate and twist to lock in place. 5 Slide and rotate the accessory aligning over the pin on the shaft. Unlock the Motor Head and move it down. Then, lock** the head to keep it down. Before mixing, test lock by attempting to raise the Motor Head. (OPTIONAL) To adjust Beater to Bowl Clearance: Tilt and lock** the Motor Head back. Turn the screw slightly counterclockwise (left) to raise the beater, or clockwise (right) to lower it. NOTE: If you over-adjust the screw, the Bowl lock lever may not lock into place. (OPTIONAL) Place the Pouring Shield***: Slide the Pouring Shield*** from front of the Stand Mixer over the Vowl. The bottom rim of the Pouring Shield*** fits inside of the Bowl*. *The Bowl design and material depend on the Stand Mixer model. **Locking option is available on selected models. ***Included with select models only. Also available as an optional accessory. 6 W11368487C.indb 6 3/9/2020 1:06:30 PM