KitchenAid KSRG22FTBT User Instructions - Page 7

Dimensions for Routing Handle Sides of Door Panels (End View) Rout entire areas of handle side of panels 3¹⁄₄" (8.25 cm). 3¹⁄₄" (8.25 cm) min. Hinge Side ¹⁄₄" (6.35 mm) max. Door Panel Door Panel Handle 2" (5 cm) min. 1" (2.54 cm) REFRIGERATOR USE Using the Controls For your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still preset. The Refrigerator Control and the Freezer Control should both be set to the "mid-settings." Your model may have Slide Controls, Electronic Controls or Digital Controls. IMPORTANT (All Controls): ■ The Refrigerator Control adjusts the refrigerator compartment temperature. The Freezer Control adjusts the freezer compartment temperature. ■ Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil. NOTE: Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster. ■ If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls. ■ The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. ■ Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made. Slide Controls (on some models) Style 1 Freezer Refrigerator IMPORTANT: ■ For Style 1, your product will not cool when the Refrigerator control is set to OFF. For Style 2, your product will not cool when the Freezer Control is set to OFF. ■ The Automatic Exterior Moisture control continuously guards against moisture buildup on the outside of your refrigerator cabinet. This control does not have to be set or adjusted. Adjusting Slide Controls Settings to the left of the mid-setting make the temperature less cold. Settings to the right of the mid-setting make the temperature colder. ■ Slide the FREEZER or REFRIGERATOR control one setting to the right or left depending on the needed temperature change. NOTE: For Style 1, after adjusting the refrigerator temperature, wait 24 hours and then recheck the FREEZER temperature before making additional adjustments. CONDITION: REFRIGERATOR too cold REFRIGERATOR too warm FREEZER too cold FREEZER too warm/too little ice SETTING ADJUSTMENT: REFRIGERATOR Control one setting lower REFRIGERATOR Control one setting higher FREEZER Control one setting lower FREEZER Control one setting higher Electronic Controls (on some models) To turn the refrigerator on, press and hold ON/OFF for 2 seconds. The indicator lights show the current temperature control settings. Adjusting Electronic Controls Settings to the left of the mid-setting make the temperature less cold. Settings to the right of the mid-setting make the temperature colder. ■ Press the FREEZER or REFRIGERATOR arrow to move the indicator light to the right, one setting at a time. Continue moving the indicator light until it is at the desired setting. cold 1 2 3 4 colder off 1 2 3 4 colder Style 2 Freezer Refrigerator Off 1 2 3 4 Colder Cold 1 2 3 4 Colder NOTE: With each press of the arrow, you will hear a beep as the light moves to the next setting. The indicator light moves to a setting of "7" and then returns to the setting of "1." 7