KitchenAid KUBR204ESB Owners Manual - Page 8
Stocking the Beverage Center
View all KitchenAid KUBR204ESB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Replace the shelf by inserting the back edge of the shelf against the rear support in the back of the compartment. 4. Align the front of the shelf to the ledge on the front of the shelf support. 5. Gently place the shelf into place. Remove and Replace the Wine Racks NOTE: When storing large bottles or magnums, remove the rack directly above. 1. Pull the rack forward until it stops. 2. Lift up on the left-hand lever while pressing down on the right-hand lever to release the rack. Pull the rack forward and lift it up and out of the rack supports. Stocking the Beverage Center NOTES: ■ For optimum wine storage, place white wines on the upper rack of the beverage center and place red wines on the lower rack of the beverage center. ■ The wine racks can be stocked with the bottles facing either direction, however, to optimize storage adjacent bottles should be facing in opposite directions. To Stock the Beverage Center: 1. Starting on the left-hand side of the bottom rack, place the first bottle with the neck of the bottle facing the front of the beverage center. 2. Place the next bottle on the rack with the neck of the bottle facing the back of the beverage center. Alternate the direction of the bottles, in this manner, until the display rack is full. A A. Lever 3. Replace the rack by inserting the rack into the supports and sliding it toward the rear of the beverage center. 3. Slide the bottom rack into place and pull the next rack forward. Stock the remaining rack as described In the previous steps. 4. Place juices, sodas or other canned beverages on the glass shelves. 8